Miata Turbo Forum - Boost cars, acquire cats.
Page 2 of 4
1
2
3
4
Show 60 post(s) from this thread on one page

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   DIY Turbo Discussion (https://www.miataturbo.net/diy-turbo-discussion-14/)
-   -   WU TANG MFers!!!! 3" exhaust installed (https://www.miataturbo.net/diy-turbo-discussion-14/wu-tang-mfers-3-exhaust-installed-13500/)

Savington 10-21-2007 06:15 PM
Why did you go with the Magnaflow over the Silverline? My Silverline is not loud at all, mabye as loud as a stock STI.

Arkmage 10-21-2007 06:24 PM
Originally Posted by y8s (Post 165440)
looks nice.

noah, what scrap you need?
PM'd ya, to keep the thread clear.

Braineack 10-21-2007 07:33 PM
Originally Posted by cjernigan (Post 165421)
Pretty sure it's an Enthuza built piece, he just had him use the Magnaflow muffler instead.
yep and yep.

Originally Posted by Savington (Post 165453)
Why did you go with the Magnaflow over the Silverline? My Silverline is not loud at all, mabye as loud as a stock STI.
I like magnaflow products (used to sell them), so i asked for one.

Originally Posted by levnubhin (Post 165428)
Sound clip?

once i fix the coupler.

shuiend 10-21-2007 07:50 PM
I am sorry I broke your coupler. I blame it on u leaving early and not helping me finish my turbo. But the gods have humor and I am driving around shooting air out my turbo jsut like you.

Braineack 10-21-2007 07:57 PM
nice! glad to here to got it finished up!!!


here's the said coupler:

https://www.miataturbo.net/~web1_bra...exhaust001.jpg



and here's my favorite part, the 2.75" to 3" test pipe to match my DP.

https://www.miataturbo.net/~web1_bra...exhaust005.jpg

Pitlab77 10-21-2007 08:12 PM
very nice

magnamx-5 10-21-2007 08:16 PM
Is the coupler a angled coupler? if not then a peice of radiator hose should get you back on the raod. +1 on the sound clips beigna major requirement. ;)

Braineack 10-21-2007 08:21 PM
no it's a 90*, otherwise it would be fixed already. I'm running it as is untill the replacement arrives, no biggie. My drive isn't far to work and I'm running a map sensor so the biggest worry is running unfilter air, which i dont really care about.

miatamania 10-21-2007 08:26 PM
Really like the test pipe...very slick.

kotomile 10-21-2007 10:00 PM
I had Jason weld up the same thing for me, but in a 2.5"-3" transition instead. So our exhausts are nearly identical but I didn't specify the magnaflow can.

Mach929 10-21-2007 10:04 PM
Originally Posted by Braineack (Post 165497)
no it's a 90*, otherwise it would be fixed already. I'm running it as is untill the replacement arrives, no biggie. My drive isn't far to work and I'm running a map sensor so the biggest worry is running unfilter air, which i dont really care about.
watch laying into the throttle, you can overspin the turbo since it will never see high enough to open the wastegate, better off if you're gonna drive it open the wastegate somehow

y8s 10-21-2007 10:12 PM
SCOTTTT what size is your bum coupler? I have a 2.5" 90.

Braineack 10-21-2007 10:22 PM
it's 2" :(

Originally Posted by Mach929 (Post 165540)
watch laying into the throttle, you can overspin the turbo since it will never see high enough to open the wastegate, better off if you're gonna drive it open the wastegate somehow

i forgot, ill be wiring the wastegate open as well. thanks for the reminder.

Braineack 10-22-2007 11:08 AM
how not fun :cry:

https://www.miataturbo.net/~web1_bra..._wastegate.jpg

Zabac 10-22-2007 11:31 AM
gettho is nice...

y8s 10-22-2007 11:51 AM
Originally Posted by Braineack (Post 165686)
i bet that smells real good when it melts.

magnamx-5 10-22-2007 12:00 PM
Originally Posted by Braineack (Post 165686)
There is only room for one person with bad photography here scot even if it is framed up very nicely :D

levnubhin 10-22-2007 12:21 PM
If you dont mind my asking. How much did the exhaust run ya?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Braineack 10-22-2007 12:28 PM
Originally Posted by y8s (Post 165706)
i bet that smells real good when it melts.
It's held up so far, has not melted. I considered stripping the plastic off, but I'im lazy.

Originally Posted by magnamx-5 (Post 165710)
There is only room for one person with bad photography here scot even if it is framed up very nicely :D
cell phone camera ftl :td:

Originally Posted by levnubhin (Post 165717)
If you dont mind my asking. How much did the exhaust run ya?
$500 shipped with test pipe

devin mac 10-22-2007 12:30 PM
Originally Posted by y8s (Post 165542)
SCOTTTT what size is your bum coupler? I have a 2.5" 90.
welcome to my sig. :-) I'd been looking for something to replace BenR's "boner museum" quote. :bigtu:


All times are GMT -4. The time now is 11:31 PM.
Page 2 of 4
1
2
3
4
Show 60 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands