Originally Posted by vteckiller2000
(Post 1443074)
Just checked my log from last night.
0-60 2.891 seconds |
1 Attachment(s)
Here is my log.
|
I just had a peek at my 1.9 60' with 8.29 at 84.8 mph 1/8 from last Wednesday. I think my 0-60 was about 3.2 seconds. 5.41 330'.
I also don't have my VSS working. |
am I allowed to play this game in my subaru? :giggle:
|
Of course, we want to see what we can beat around town.
Can I eat a badass Vlad-e-tuned rabus or not? :skid: |
If I can figure out how to get the Hydra to record 0-60 I'll post up. Is anyone using launch control for this?
|
I have not used it yet
|
Originally Posted by vteckiller2000
(Post 1443113)
Here is my log.
|
|
Pat wins :likecat:
anyways dug out my old slip https://www.miataturbo.net/attachmen...ine=1439442529 according to bench racing calculator that's right at 3sec, I know I also have the log so I'll try to find it too. a 350whp miata would definitely gimme a run for my money if on proper surface |
Originally Posted by patsmx5
(Post 1443201)
Ignoring wheel spin, and starting the clock when the revs begin to drop (when you launched) I got a start time of 25.24, and an end time of 28.602, for a 0-60 of 3.362 seconds. That's how I calculate it anyways.
Impressive regardless! |
I launched in first, shifted to second around 50mph, if you watch the tach you'll see and hear the RPMs drop a bit around 50mph. This trans/converter is designed for max acceleration, so the RPMs don't sag a lot on gear changes to keep the motor in the powerband.
|
Originally Posted by patsmx5
(Post 1447823)
I launched in first, shifted to second around 50mph, if you watch the tach you'll see and hear the RPMs drop a bit around 50mph. This trans/converter is designed for max acceleration, so the RPMs don't sag a lot on gear changes to keep the motor in the powerband.
|
Why do the revs crash and then jump back up like that?
|
Good job Pat!
|
Originally Posted by ridethecliche
(Post 1447827)
Why do the revs crash and then jump back up like that?
Originally Posted by sonofthehill
(Post 1447830)
Good job Pat!
|
|
https://youtu.be/9_ntliFffRU
One of my runs was 4.0 to 100kph(62mph) and 11.3 to 200kph. With r888 tires and NO grip. With better traction it would probably be in the low 3sec range to 100kph. |
Very quick! Good job!
|
I have measured 0-60 using the dragy gps device, performance expert app and older g-tech. I usually get somewhere in the mid 3 second range 0-60 on all three measuring tools. The dragy device uses accelerometer as well as high speed gps, plus its been tested by many people while at the drag strip and proven reliable, so that's the one I trust the most for my personal testing since the most local drag strip is over an hour away. One has to be careful when using speedometer or driveline sensor data as wheel spin will skew the results. The following pics are screen shots from one of my most recent dragy 1/8th mile tests. On the same run it recorded a 7.36 second at 102.76 mph in the 1/8th mile while reaching 0-60 in 3.50 seconds or 3.26 seconds factoring in a 1' rollout.
https://cimg9.ibsrv.net/gimg/www.mia...fa3bfe4ad2.png https://cimg9.ibsrv.net/gimg/www.mia...838690c71d.png |
All times are GMT -4. The time now is 11:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands