Originally Posted by 208fabrication
(Post 1610340)
I run M&H slicks. Here is a pass I made and the dragy of the same pass, maybe I just expect the dragy to be closer to actual.
You are within three hundredths of a second and 0.37 mph. That's pretty damn close. |
Ok I will accept the limitations of this technology and be happy with it.
|
Originally Posted by 208fabrication
(Post 1610340)
I run M&H slicks. Here is a pass I made and the dragy of the same pass, maybe I just expect the dragy to be closer to actual.
https://cimg0.ibsrv.net/gimg/www.mia...dcd25a1375.jpg https://cimg3.ibsrv.net/gimg/www.mia...9976d74235.jpg LOL! As LukeG said. Thats pretty damn close! I dont know how much closer you can expect. Some of the difference can be due to if you shallow or deep stage. the Dragy, or any other device, has no way to account for that. I've tried the Dragy, g-tech and perfexpert app. The dragy was consistently by far the most accurate to the actual time slip. As I said, its always within a tenth of a second and 1 mph, and usually closer than that, to the actual timeslip. Thats good enough for me and 99% of the guys out there. |
There is quite a bit of variation in how long it takes humans to blink, but it seems like most internet sources agree on an average time around 300-400 millisecond. Your dragy example is within a tenth of that.
IMO that's pretty accurate. |
https://cimg6.ibsrv.net/gimg/www.mia...f52c502020.jpg
https://cimg7.ibsrv.net/gimg/www.mia...3b1400cb01.jpg got my best 0-60' and 0-60mph this weekend. |
Very good numbers!
Quick details on car setup? |
Originally Posted by 208fabrication
(Post 1611120)
https://cimg6.ibsrv.net/gimg/www.mia...f52c502020.jpg
https://cimg7.ibsrv.net/gimg/www.mia...3b1400cb01.jpg got my best 0-60' and 0-60mph this weekend. |
Originally Posted by der_vierte
(Post 1611123)
Very good numbers!
Quick details on car setup? 142,xxx mile stock 1.6 stock 5 speed T3 ebay turbo @ 18psi custom turbo manifold and full 3 inch exhaust ID 1050 injectors Speedyefi pnp ecu Walbro 190lph w/E85 M&H 24.5 slicks |
Got some new lower numbers in the 0-60mph of 3.50s and if you accept the 1ft roll out it is a 3.21s
https://cimg3.ibsrv.net/gimg/www.mia...808677b7bc.jpg |
FAST!
What rpm you are reving to? What tire setup? |
Originally Posted by 208fabrication
(Post 1624391)
Got some new lower numbers in the 0-60mph of 3.50s and if you accept the 1ft roll out it is a 3.21s
https://cimg3.ibsrv.net/gimg/www.mia...808677b7bc.jpg I assume at the track on slicks? Was this on your 11.69 pass in the 1/4? High tall are the tires? |
Originally Posted by der_vierte
(Post 1624403)
FAST!
What rpm you are reving to? What tire setup? |
Originally Posted by Newaza
(Post 1624414)
Thats quick!
I assume at the track on slicks? Was this on your 11.69 pass in the 1/4? High tall are the tires? |
|
https://cimg4.ibsrv.net/gimg/www.mia...0d2066cde9.jpg
creeping up on that 2 second zone! |
Hi, I know this is a very old thread. But could you fill me in on the modifications you were running to get into the 3s? I have and ND2 so it might not be possible but I would like to get an idea of what I should do.
|
Figured I would post a dragy video from trip to the track the other day. I already posted it on my build thread. It shows 0-60 as 2.54 seconds. The video time shown doesn't take into account rollout. With rollout it was 0-60 in 2.34 seconds. Anyways I figured this could revive an older thread in case any others want to get cracking on here.
|
All times are GMT -4. The time now is 10:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands