NA6 10psi 13.62 @ 102mph
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Brisbane, Australia
Posts: 109
Total Cats: 0
NA6 10psi 13.62 @ 102mph
Well I finished doing my completely homemade turbo setup recently. The setup basically consists of mspnp, 440cc rx7 injectors, homemade manifold(similar to the turbotim one but simpler), homemade coller piping dump etc, ebay 550mm x 180mm fmic(matte black ofcourse) and a T25 from an R34 GTR(tiny turbo, one of the twins)
Car has 4:3 Torsen, 6speed, brass button clutch, 195/50 bridgestone adrenalin tyres. Engine is up to 230 000km with 265deg cams.
So I have got it running pretty nice just on a road tune for fuel, using katomile's timing map till a get a proper tune(thanks mate). Thought I would just take it for a strap down the quarter. Took a couple goes to get the launch right, I tried second gear launch for the first couple runs but it bogged a bit too much after getting off the line nicely, it ran 14.0 launching in 2nd.
Tried first gear launch, and as long as I controlled wheelspin right and hit second real quick it was consistantly around the 13.6-13.7 mark. As per title best time was 13.62 which I was pretty happy with. Considering the size of the turbo and only 10psi I was expecting lowish 14.
I dont have a scanner but here is what the slip has:
R/T - 0.890
60ft - 2.062
330ft - 5.742
660ft - 8.781
M.P.H. - 82.21
K.P.H. - 132.2
1000ft - 11.425
ET - 13.628
M.P.H. - 102.81
K.P.H. - 165.46
14deg, 93%H, 1018mB, 188RA, (TT)24deg
Cheers, Tim
Car has 4:3 Torsen, 6speed, brass button clutch, 195/50 bridgestone adrenalin tyres. Engine is up to 230 000km with 265deg cams.
So I have got it running pretty nice just on a road tune for fuel, using katomile's timing map till a get a proper tune(thanks mate). Thought I would just take it for a strap down the quarter. Took a couple goes to get the launch right, I tried second gear launch for the first couple runs but it bogged a bit too much after getting off the line nicely, it ran 14.0 launching in 2nd.
Tried first gear launch, and as long as I controlled wheelspin right and hit second real quick it was consistantly around the 13.6-13.7 mark. As per title best time was 13.62 which I was pretty happy with. Considering the size of the turbo and only 10psi I was expecting lowish 14.
I dont have a scanner but here is what the slip has:
R/T - 0.890
60ft - 2.062
330ft - 5.742
660ft - 8.781
M.P.H. - 82.21
K.P.H. - 132.2
1000ft - 11.425
ET - 13.628
M.P.H. - 102.81
K.P.H. - 165.46
14deg, 93%H, 1018mB, 188RA, (TT)24deg
Cheers, Tim
#3
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Brisbane, Australia
Posts: 109
Total Cats: 0
No idea on whp, not till I get it on the dyno to get tuned in a couple months when I have the cash. I might try and source another stock motor before then and give the head and maybe also the rings a bit of a freshen up before it goes in, since the poor old thing has so many kms on it. If I had to guessthe hp I would have said 170-180 but that may be very conservative. I think the close ratios of the six speed really help it down the quarter too, so the lack of torque isn't so apparent.
Tim
Tim
Thread
Thread Starter
Forum
Replies
Last Post
Andifer
Miata parts for sale/trade
8
09-23-2015 05:43 PM
theshdwconspracy
Miata parts for sale/trade
0
08-29-2015 06:48 PM