Help with figures?
Can anyone give me some help with getting hold of a programe that can work out my BHP figures? Have heard of a couple like data log lab's that can do this.
I am running a TEC2, RC 550's,FMIC, WI and running at 15psi anyone got a similar set-up? I would like to intruduce my car with some figures! any ideas? |
15psi means nothing. What turbo are you running? CFM of air makes power, not pressure. Pressure is a by product.
|
Sorry,
greddy kit TD-04, with modded 2.5 inch DP 2.5 exhaust sytem. |
if you can hold the 15psi to redline then you'll be in the 230-250rwhp range.
|
How good is your tune any overbore with a tec2 you should be able to max the turbo to 270 or so whp with a stellar tune. The easiest way is to pony up 50-60 bucks and do a few dyno pulls on it.
|
What do you mean by 'overbore'?
General tune is pretty good, I'm trying to fine tune it now! When I feel I've done all I can on the road it could go on the rollers! BUT I have heard of calculators or programes that can work-out your BHP by putting in figures? That is what I am after! Any ideas Has anyone on here got a greddy td04, tec2 setup? |
What you are asking is too complex for a simple formula. And if you did find such an animal it wouldn't be too accurate.
But in the end, who cares what whp # you might be making now? Wait till you have it on the dyno and compare to other similar setups to make sure you are close to what others have done. |
Thats the fall-back plan Jay
|
All times are GMT -4. The time now is 08:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands