Help with figures?
#1
Help with figures?
Can anyone give me some help with getting hold of a programe that can work out my BHP figures? Have heard of a couple like data log lab's that can do this.
I am running a TEC2, RC 550's,FMIC, WI and running at 15psi anyone got a similar set-up?
I would like to intruduce my car with some figures! any ideas?
I am running a TEC2, RC 550's,FMIC, WI and running at 15psi anyone got a similar set-up?
I would like to intruduce my car with some figures! any ideas?
#6
What do you mean by 'overbore'?
General tune is pretty good, I'm trying to fine tune it now! When I feel I've done all I can on the road it could go on the rollers!
BUT
I have heard of calculators or programes that can work-out your BHP by putting in figures? That is what I am after! Any ideas
Has anyone on here got a greddy td04, tec2 setup?
General tune is pretty good, I'm trying to fine tune it now! When I feel I've done all I can on the road it could go on the rollers!
BUT
I have heard of calculators or programes that can work-out your BHP by putting in figures? That is what I am after! Any ideas
Has anyone on here got a greddy td04, tec2 setup?
#7
What you are asking is too complex for a simple formula. And if you did find such an animal it wouldn't be too accurate.
But in the end, who cares what whp # you might be making now? Wait till you have it on the dyno and compare to other similar setups to make sure you are close to what others have done.
But in the end, who cares what whp # you might be making now? Wait till you have it on the dyno and compare to other similar setups to make sure you are close to what others have done.
Thread
Thread Starter
Forum
Replies
Last Post
matthewdesigns
Suspension, Brakes, Drivetrain
1
10-10-2015 02:07 AM