Techsalvager's cheapness dyno
So I was able to dyno my car and in the end, last run made 148hp and 139tq
Still needs tuning first pull made 136hp and 129tq I will scan the dyno sheet in a picture tomorrow http://img716.imageshack.us/img716/5...ture001mjv.jpg Uploaded with ImageShack.us |
:loser:
JK. Good numbers for your budget. What psi was that at? |
Originally Posted by curly
(Post 718741)
:loser:
JK. Good numbers for your budget. What psi was that at? I'm gonna work on the wastegate and see if that helps with the noise up top. Also check my couplers and anything in the intake tract |
What's your boost source?
|
compressor housing, gonna change it to pre tb, post ic
|
That'll help a lot. Any problem anyone has about anything, first thing you ask.
|
Garrett T3 "60 trim"
compressor trim: 60 Compressor Inducer: 1.830 Compressor Exducer: 2.367 Turbine Exducer: 1.898 Turbine Inducer: 2.319 stage 1 turbine wheel .48 ar turbine housing orginally .63 ar turbine housing, but odd old nissan bolt pattern |
All times are GMT -4. The time now is 03:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands