Techsalvager

So I was able to dyno my car and in the end, last run made 148hp and 139tq
Still needs tuning
first pull made 136hp and 129tq
I will scan the dyno sheet in a picture tomorrow


Uploaded with ImageShack.us

curly

iTrader: (25)

JK. Good numbers for your budget. What psi was that at?

Techsalvager

7psi, tapers off to 5psi and comes back on later to 6psi

I'm gonna work on the wastegate and see if that helps with the noise up top. Also check my couplers and anything in the intake tract

curly

iTrader: (25)

What's your boost source?

Techsalvager

compressor housing, gonna change it to pre tb, post ic

curly

iTrader: (25)

That'll help a lot. Any problem anyone has about anything, first thing you ask.

Techsalvager

Garrett T3 "60 trim"

compressor trim: 60
Compressor Inducer: 1.830
Compressor Exducer: 2.367
Turbine Exducer: 1.898
Turbine Inducer: 2.319
stage 1 turbine wheel

.48 ar turbine housing
orginally .63 ar turbine housing, but odd old nissan bolt pattern