Autotune not working?
Queston. I finally got my setup to run. I set it to auto tune but the cells are not filling in. When on map trace you can see it bouncing from cell to cell, but it is not leaving any values there. I have a target AF map and I have the affected map set to I/J 1 map. I have them set to switch 1 and 2 in the front panel and switch on and 2 are in the on position. Am I missing something?
|
Nobody?
|
is your wideband working right? post your EM2 file so we can look or pictures.
|
1 Attachment(s)
Logger is reading it. I attached one of the datalog files I ran.
|
1 Attachment(s)
Here my setup file. Cars finally running properly, just can't see any signs that the auto tune is doing anything
|
Bump
|
i would lower the water temperature setting on the A/F target tab to 45 or 50. start time to 1 sec, throttle position to 25. try that
|
Originally Posted by musanovic
(Post 216659)
i would lower the water temperature setting on the A/F target tab to 45 or 50. start time to 1 sec, throttle position to 25. try that
Celcius or Farhenheit? |
i would leave it at C and set everything else at C as well.
|
Thanks, fyi, I'll be in Gboro this weekend. Gotta for fix my kids car.
|
hopefully it will help out. maybe you can show up for some auto-x events. my car is getting new turbo manifold and DP made so i will be out of commission for the next 1.5 weeks.
|
That worked, thanks
|
All times are GMT -4. The time now is 10:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands