Can I get some opinions on these logs? (Zeitronix and EMB)
2 Attachment(s)
When I boost I'm not getting consistent power delivery, there is some slight hesitation before 4k, but after that it seems better. I'm currently boosting around 7psi with the Profec B. Also of concern is my off-boost/idle AFR reading of around 20. Any ideas guys?
|
Post your current *.gsc file to run the logs against, please.
You don't seem to idle long enough on the Zeitronix logs for it to come down and normalize. Let it idle for awhile and log it for maybe 2 minutes after the car is warmed up. The 20AFR will always be there as the injectors shut off on deceleration. |
1 Attachment(s)
Here you go...
|
Late in the GReddy datalogs, your O2 sensor seemed to be reacting differently than in the beginning. What type O2 sensor(how many wire) and how old is it?
Email me and I'll send a modified map to help smooth it out and adjust the AFR. When you see what I do to the map, you will be able to make finer adjustments based on your Zeitronix and Emanage datalogging |
It's just a universal 1-wire sensor... I'd say it's just under 2 years old. Also, I adjusted the green LED screw to around .45V if that matters, it came set to .33V.
|
All times are GMT -4. The time now is 11:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands