Emanage Ignition Help - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members
 


E-Manage Post your questions about greddy e-manage installation and tuning here.

Reply
 
 
 
LinkBack Thread Tools
Old 04-04-2010, 01:21 PM   #1
Junior Member
Thread Starter
 
Join Date: May 2008
Location: Stafford - UK
Posts: 74
Total Cats: 0
Default Emanage Ignition Help

I finally managed to get the Emanage blue hooked up to my ECU and have a couple of problems. Firstly, it will only fire up if I remove the Emanage ignition harness. I originally cut ignition 1 and 2 on the harness and connected them as per the instructions, but it won’t fire up. The instructions say:

Ignition 1 - blue/white wire to ECU
blue/black wire to Sensor

Ignition 2 - Orange/white wire to ECU
Orange/black wire to Sensor

Am I missing something? Am I correct in saying that there are only 2 ignition points on the ECU harness? The second problem I have is that the car will start up and then immediately cut out, can anyone tell me what the problem might be? Everything is fine once I remove the Emanage.

BTW - my car is a 1997 Mk1 (NA) 1.8.
yan816 is offline   Reply With Quote
Old 04-04-2010, 05:31 PM   #2
Junior Member
Thread Starter
 
Join Date: May 2008
Location: Stafford - UK
Posts: 74
Total Cats: 0
Default

I disconnect the wiring to the MAF and that allows the engine to run. I have larger injectors to go on so I take it I will need to run the MAF to the Emanage some how? Does anyone have any idea why I cant use the ignition harness?

I will also want to data log using my AEM wide band how do I connect this?
yan816 is offline   Reply With Quote
Old 04-07-2010, 05:37 PM   #3
Junior Member
Thread Starter
 
Join Date: May 2008
Location: Stafford - UK
Posts: 74
Total Cats: 0
Default

I still cant get the emanage to run with the MAF wire connected or it to run with the ignition harness wired in. I hooked my lap top up and made sure evrything was zero'd and that the main unit was updated. I am using version 1.49 of the software.

Does anyone have any idea of what else maybe wrong?
yan816 is offline   Reply With Quote
Old 04-11-2010, 04:40 PM   #4
Junior Member
Thread Starter
 
Join Date: May 2008
Location: Stafford - UK
Posts: 74
Total Cats: 0
Default

This is what I get when I load up the support tool'



I just cant seem to run the ignition harness and am at a total loss as to why its not working. I've gone through and checked every wire a dozen times and gone over the ECU pinouts countless times.
yan816 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Cannot set Base Timing to 10* Elfering MEGAsquirt 50 10-05-2015 09:04 AM
01-05 Fab9 PNP COPs (used) FrankB Miata parts for sale/trade 6 09-30-2015 12:48 PM
Mystery Engine Trouble. Halp, mt.net! vehicular General Miata Chat 12 09-14-2015 04:17 PM
emanage ultimate 1.6 basemap xmacmiatax ECUs and Tuning 0 09-08-2015 05:17 PM
ME221 Now has Autotune and Long Term Fuel Trim Tables Motorsport-Electronics ECUs and Tuning 0 09-05-2015 09:02 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 02:48 AM.