EMB DEAD car runs but no Communication
i was tuning my car this morning ,exportted my data to my emanage blue unpluged my usb from EMB went for a drive, came back and now i have no communication with the unit with my laptop or desktop could it be dead?
please help i have done everything com ports install freash support tool is there a way to do a master reset ion the EMB? HELP my EMB will not go online |
Is the EMB working at all? I forget if its supposed to, but does the light come on when you start the car? Does the car still drive like it you had it tuned? In Windows, do you see the device at all in device manager? Are you using serial or an adapter from serial->usb? Try a different port on the PC if possible, if you're using an adapter, try a different one. I've never heard of an EMB just dying, though I'm sure it's possible, I bet your issue is on the PC side.
|
More than likely it's a com port issue. USB to serial adapters have a habit of changing com port numbers if used in different slots. Also it's possible that the adapter died.
I would be suprised if your emb isn't communicating, but still "working".... You could try a different usb to serial adapter.... or swap emb cables with somebody.... Dave, |
I second what Dave said, the EMB can be flaky when using a usb-serial adapter cable. I find with mine, alot of the time it loses communication during real time logging and reseting the computer usually fixes it. However, sometimes even after a reset, it still won't talk to it.
Fire up my old pentium III 650 notebook with a dedicated serial port and use it instead and it has never once failed. My bet is its just acting funny with your adapter and your emulated comm port in windows. Try and test it with the proper serial cable on an older laptop before panicking. Regards |
im having a similar issue with ultimate. when my laptop is connected, and the program is open, all i get is a box that says "communicate in real time?" "ok" or "cancel" and everytime i hit ok or cancel, the box pops up again three seconds later. and it keeps doing that.
|
Another one...
Incredible, more than 500 dollars and the company has not resolved simple communication issues. I got two laptops, one with XP and another one with Vista, the XP is useless no communication at all. On the Vista, got to uninstall the Support tools, sometimes a few times, uninstall the com port drivers and maybe one out of five times it will read it. Then it works well, if I take a one hour break, once I come back it is back to zero. The E-Manage piggy back controls are a breeze to work on and very reliable, but the software communication to the hardware is VERY mediocre. Now I am fishing on Craigslist for an old laptop, this is unreal. I am seriously selling it on CL, do not know yet... |
Originally Posted by turbo94
(Post 423418)
im having a similar issue with ultimate. when my laptop is connected, and the program is open, all i get is a box that says "communicate in real time?" "ok" or "cancel" and everytime i hit ok or cancel, the box pops up again three seconds later. and it keeps doing that.
|
Originally Posted by musanovic
(Post 426675)
your problem is that your version does not match on the emu and compute update software and comp both it will go away
The version does not match < What does it mean? Can you explain how to resolve the version does not match? comp both it will < What? :crx: |
You can get updates for the PC software as well as the included firmware updates from GReddy's site: Greddy - Founded and Driven by Racers
Click your product and there should be an update link on the next page. |
Originally Posted by messiahx
(Post 426860)
You can get updates for the PC software as well as the included firmware updates from GReddy's site: Greddy - Founded and Driven by Racers
Click your product and there should be an update link on the next page. |
All times are GMT -4. The time now is 11:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands