4sfed5 |
02-12-2008 02:03 AM |
set up a map to pull 1 degree per 1 pound of boost......then adjust it so that at 5500rpm you add 1 degree back in and then add another 1 degree in at 6500rpm...
also i like to add in 1 degree between 2000-3000 to aid spool up and 2 degrees between 1000 and 2000rpm.
this map will give you max retard between 3000-5500 and either side youll have a bit of progressive advance. i also re scaled mine mine so it was pulling 6 degrees max at 8 psi and didnt start the retard until 2 psi.
|