EMB Timing map
#1
Elite Member
Thread Starter
iTrader: (24)
Join Date: Jul 2007
Location: Cypress, TX
Posts: 3,759
Total Cats: 35
EMB Timing map
I'm looking for figures for an intercooled Greddy kit. I'm getting kinda tired of running at -8 timing anytime I'm in boost. (14 degree base timing but I can transpose it.)
#3
set up a map to pull 1 degree per 1 pound of boost......then adjust it so that at 5500rpm you add 1 degree back in and then add another 1 degree in at 6500rpm...
also i like to add in 1 degree between 2000-3000 to aid spool up and 2 degrees between 1000 and 2000rpm.
this map will give you max retard between 3000-5500 and either side youll have a bit of progressive advance. i also re scaled mine mine so it was pulling 6 degrees max at 8 psi and didnt start the retard until 2 psi.
also i like to add in 1 degree between 2000-3000 to aid spool up and 2 degrees between 1000 and 2000rpm.
this map will give you max retard between 3000-5500 and either side youll have a bit of progressive advance. i also re scaled mine mine so it was pulling 6 degrees max at 8 psi and didnt start the retard until 2 psi.
Thread
Thread Starter
Forum
Replies
Last Post