hey i have a problem i have a set of 450cc low impedendce injectors, works and idles fine without resistors but with resistors it wont even crank at all.....

HELP?

im using 10 ohm 10 watt resistors..........

 

Don't be annoying. Posting two threads about the same thing in a few hours isn't going to make people help you any faster. Pretty sure you should be using 10 ohm 10 watt resistors.
Using a DMM what resistance do you get when testing the injector itself?

Read this thread.
https://www.miataturbo.net/forum/sho...ance+resistors

 

Indeed. Step 1 is to determine with an ohmmeter exactly what the resistance of the injectors is.

If you get somewhere in the 12-16 ohm range, they they are high impedance injectors. If they are in the 1-4 ohm range, they are low impedance.

For low-impedance injectors, you generally want about a 10 ohm resistor in series with each injector. The wattage is not something you need to hit exactly- it's a maximum capacity, not a precise value. 10 watts will suffice, 20 or 25 will give you a bit more headroom.

 

thank you, i got it working i just used a factory resistor box......... if anyone needs one let me know, i have a few that i will sell for low prices.... thanks

 

Since the Injectors I bought from Hot95MiataGuy= fail, I'm just going to pull the low ohm injectors from my buddies parts car. How do you wire the resistor box and how much are you looking to get? Feel free to pm me.. Thanks- Bryan

 

here is a resistor explanation and a calc to help you figure it out: http://injector-rehab.com/kbse/resistor.htm

it was posted in the linked thread, but figured I would put it in here as well.