need a emb map
I am in need of a map for a 1.6 with a greddy on six pounds. 1.8 injectors, walbro 255, vortech fmu, fmic, autotune, o2 clamp, 2.25 straight exhaust, if u have a map close post it up please will have 305's next week if you have a map for them. Thanks
|
Autotune map is completely different from regular EMB map. Email me the one in your unit and I'll check it out.
|
Ok, I just got the unit yesterday I will have it installed within the next few days then I will try to send you the map. Will the autotune make a complete map for my car as a new map or will it use the old map that the previous owner had. Been reading up on this but still not comprehending everything.
|
There will probably be modifications required. Will need to know what your base timing is and the map sensor you are using. Map controls timing and fueling. My email is bruce@brucebuchner.us. Do you have the instructions?
|
Yes I have the instructions somewhat, it is a gm 2 bar and I have a bipes still on the car should I totally ditch it during the install or leave it I'm sorry for all the questions but I'm very new to the turbo stuff and the faqs are just not fully hitting home thanks
|
The EMB will replace the Bipes
|
Should I also remove the fmu and go with an afpr? Trying to get all my eggs in a row for the install tomorrow anything else that you think I won't/will need or I will do wrong please tell me thanks
|
You will need the AFPR for the 1.8 injectors. What are you referring to as "FMU"
|
The vortech thing with the greddy kit
|
Originally Posted by b16acrx1988
(Post 465456)
The vortech thing with the greddy kit
|
Hooked it up now no fuel pump wtf
|
When we hook up the igniters through the e manage no worky wtf everything else hooked up starts right up
|
Perhaps bad EMB? Or if the map is way off from what your stock timing is, you may have the spark at the wrong time.
|
so i need to look at my map, I bought the everything used from another member and he did the modification to it where you just hook up the bullet connectors and it works we have been going over wiring multiple times but it is just the igniter wires that are not working correctly
|
Alright got it running timing was off like you said. Now I just need a map olderguy hook it up please, I have already sent you an e-mail also
|
Thanks for the help everyone the car is running decent I'm going to try and make a trip to the dyno this weekend and get me a good tune down with my 305's and 8 or 10 lbs of boost. And just tune myself after that, because I have the money for a tune but I want to get rid of the greddy dp and this 2.25 straight exhaust. What number you think I should see with Walbro 255, greddy kit, fmic, autotune, o2 clamp, emb, 305s, and straight piped on 10 lbs?
|
All times are GMT -4. The time now is 10:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands