Why not start our own database of EM maps? there are more and more of us with EM's running around every day.
Attach the file to your post by clicking on manage attachments and please include a rundown of your setup, PSI level etc. By attaching them to the board they'll be here forever or until you edit the post and delete them.

 

I'll start by adding the maps from the emanage yahoo group.
Here's FFR's 11-12 PSI map

I'm using this map also
thanks FFR!

 

1990 Turbo Miata with stock injector and 12:1 Vortech FPR. Greddy MAP sensor is wired into AUX TPS, 7.5 PSI

 

Miata 1.6L 8PSI, 305Inj, 12 deg, AFPR

 

Miata 92A /12PSI AFPR 305's my latest map

 

well, if it's your map you know what you tuned it on. Keep in mind gas changes around the country also, premium in colorado is 90. Thos emaps are off the yahoo group and do not say, so use at your own risk.

 

thats 12 degrees retard right?

 

is this without the autotune?

 

Where have the maps gone?

 

i think phillip took them with him

E-manage has a yahoo group that should have a few maps though

 

These are the maps I'am running on my 1999 miata.

Emanage Blue
FM O/2 clamp
Garrett T-25 48/49
10 psi boost
2-1/2 exhaust
323 GTX Turbo 360cc injectors (Flow rate over 400cc due higher NB fuel psi)
p/n 195500-2130
Base timing is 12* (modifided crank angle sensor)

 

because some people might benefit (and all the old maps are gone) here all the maps I found on the yahoo group. The posters were not that great about listing *all* variables I think but I have listed as many as I could figure out.

 

Went to the Dyno on Christmas eve. (Abacus Racing) here in Va. Beach, Va
Garrett T-25 (Saab Turbo TB2531) 48/49
10 psi. boost
210 RWHP
A/F High 10's - Low 11's
This is the new fuel map they had me run. timing is still the same.

 

Update:
I'am now running 11 psi boost with a Greddy pressure sensor here are my current maps

 

thanks for all the maps guys

 

I'm looking for a map for a 99 running an EMU. I'm planning to run a GT2560R but want to get the management installed before I start the turbo project. I definitely want to go piggyback and am currently trying to decide between the EMU and an AEM fic. I have downloaded the software for both systems and would like to get familiar with their capabilities before making a final decision. It would be really helpful to have some maps to get a sense for how people are using the EMU.

Thanks,

Dan

 

olderguy or Joe should have a few I believe

 

every ones map is different my looks like this
february tune 09 wideband working.EM2

it is a ok file not the best i am still fine tuning it
running a t3 super 60 EMU
o2 clamp by Joe
460cc injectors
11psi

 

Been talking with Joe over PM. He does not have access to his maps right now but thought I might find old copies kicking around on the forum. I haven't had luck finding them yet. If anyone knows where they are, give a point.

 

Ok, This is the map that I'm looking for:

94 1.8L
GT25r turbo (not sure of the numbers)
autotune
Greddy Pressure sensor
326 injectors out of a probe (direct fit)
looking to push about 10psi (maybe a little less)

Is there any other info I need to list? Let me know if there is anyone out there with something I can start with.

Tony