OK so getting into the meat of starting my tune. Got most of the variables locked in... I'm starting with these maps that I've cobbled together. Car is a 16 running a vf10 turbo which is similar to a 2560...
Any helpful comments on improving the maps would be great. (max boost is 165-170kpa)

 

Good maps, ready to go.

Use good fuel!

 

I would richen up your boosted rows, and there’s a few spots on the spark table that don’t reduce timing with increased boost.

 

Could go 11.5 in boost, but its only 190kpa max, so it's not going to go BOOM because of that. Timing is on the conservative side, if he uses 93 octane.

Just hope his base timing is set

 

Timing is locked in and checked. I'm running 98ron fuel which is the same as 93 in the USA?

 

No problem with this map on 98ron

 

I live in Colorado, would this be a good timing map to use with 91 octane? Its the highest I can get here. Or should I just retard everything a couple degrees?