XEDE maps NEEDED
#5
You tune it yourself bruh'
I highly suggest heading over to this pdf LINK & chiptorque's website for additional tuning & setup.
What wideband are you using & has it been calibrated correctly
Not to familiar with stock injectors etc and what voltage they need to be at.
Don't touch the spark map until you understand what it does.
You can however start adding fuel. When you start adding load and it goes lean make a note at which rpms it's doing this and trace it back to your fuel map. use the > key to increase fuel. Do it in more than just 1 cell and you'll see it jump back down. Keep tuning and smoothing out the fuel.
Try to obtain a way to log your AFR so you can just review that at all rpms in the spectrum when you accel.
Or, call BEGi
More than likely your tuner won't know how to xede... unless they're actually competent at tuning in general. (multiple ecus etc.)
Last edited by Girz0r; 12-03-2015 at 06:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
psyber_0ptix
Engine Performance
34
12-10-2016 08:51 PM