Just installed link, worked until I turned the ignition... died
 

I have my link all installed now, all the readings and everything were good, then I turned the key to start it and all the power went out, I still get a reading at the battery but no lights come on the dash or anything when I turn the key now. All the fuses look fine, I checked the ones under the hood and dash, any ideas? I really appreciate any help cuz we're basically sitting here now until we figure it out.

nevermind, found it the problem!

Ah it started up and ran fine again, then ran super rich to the point of stalling, then tried to start it and it would crank but not start, now its doing the same thing, battery has power but nothing else lights up or anything when I turn the ignition.

When i was toying with my xede and flooded mine i was having same problem, it would crank but not start. The main reason was that the O2 sensor was drenched. After it dried out it would start right back up.