Looking for an LED AFR
 

Does anyone make a LED/LCD type AFR read out that is not a gauge? Looking for something slim (not a 52mm gauge) that I can mount on my steering column.

Like this but something OTS

https://www.miataturbo.net/attachmen...ine=1335237830

http://www.ebay.com/itm/Waterproof-4...ht_2334wt_1025

Like that? Any kind of volt meter will work, long as you program the controller to output correctly.

No need powah!!!!!!!!

lol...

So how would I work that? Set the calibrations on the Innovate program to match the display? Seems to me like it is meant for a voltage readout how would I get a 0-5v sensor to work on that?

http://miataturbo.wikidot.com/wideband-gauge

Yeah just set the outputs on the lc1, or whatever you're using.

Interesting. I imagine you would have to play with it a bit to get it right on? By having ht elaptop open with the innovate gauge on there and trying to match it up?

Nah, do the 1-2v range, 10:1 at 1v and 20:1 at 2v.

So if you have 14.7 itl output 1.47v.

On some volt displays you can change the decimal point and make the 1.47v show 14.7v.

I had this running back with my old MS1 and LC1, everything was spot on.

Innovate Auto Timer - Wideband gauge / Turbo Timer / Volt Gauge
https://www.miataturbo.net/attachmen...ine=1335271500
https://www.miataturbo.net/attachmen...ine=1335271500

C