Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)

- ECUs and Tuning (https://www.miataturbo.net/ecus-tuning-54/)

- - ms2e No Rpm Signal (https://www.miataturbo.net/ecus-tuning-54/ms2e-no-rpm-signal-85927/)

Dobzeh

09-15-2015 06:55 PM

ms2e No Rpm Signal

4 Attachment(s)

The car ran fine on older firmware, I updated the firmware to the correct version and loaded up my tune and project settings and now the car wont start.
I am not geting a RPM Signal in tunerstudio this is a rev built Ms2e.
I am putting the tune i use bellow and a log of me cranking it, This is my daily driver and i need it running asap.
Attachment 150107

Attachment 150108

Dobzeh

09-15-2015 09:20 PM

I plugged in the stock ecu and the car started right up so all my important sensors seem to be working, any ideas on what could be going on

Dobzeh

09-16-2015 06:15 AM

I loaded up diy auto tune base map and I am still getting no rpm signal in tuner studio, does anyone have a basemap for a 99-00?

Dobzeh

09-16-2015 10:13 PM

Anyone?

Matt Cramer

09-17-2015 09:34 AM

Can you post a composite log of an attempted start?

Is Rev helping out? These have a lot of his own custom work and he's really the only one with complete details.

Dobzeh

09-17-2015 02:56 PM

Quote:

Originally Posted by Matt Cramer (Post 1267427)

Can you post a composite log of an attempted start?

Is Rev helping out? These have a lot of his own custom work and he's really the only one with complete details.

I will post that when I get home from work,I don't have his email I haven't personally asked him for help yet but if I don't figure this out of will.

All times are GMT -4. The time now is 09:42 AM.