Mslabs Mini ms3 setup question(s)
 

Hey guys I'm working slowly on getting everything set up to install. I'm new to any standalone stuff and I'm learning as I go. I currently have a ms labs ms3 mini for 01 to 05 miata. I'm looking at what else I need to do to the board before installing it in its case. I saw the electronic boost control pin that needs to be set up and idk where to hook it up to. Any help would be appreciated! I might just keep posting other stuff regarding this board here if more comes to light. Also anyone else want to add other questions or tips please do!
https://cimg1.ibsrv.net/gimg/www.mia...4838fa26bf.jpg
https://cimg3.ibsrv.net/gimg/www.mia...2db75d1527.jpg

Looks like in the bottom left of your first picture, you can see CANL, CANH, and EBC.
The EBC pin is electronic boost control. Solder a .1" pin or wire in there.

That's as far as I could figure out too haha. Do I just wire straight to solenoid and ground to the chassis or can I solder to a pin on the ecu connector so I can utilize the ground for the ecu