n00b dyno tuning question. - Miata Turbo Forum - Boost cars, acquire cats.

Welcome to Miataturbo.net   Members

ECUs and Tuning Discuss Engine Management, Tuning, & Programming

LinkBack Thread Tools Search this Thread
Old 05-21-2009, 05:56 PM   #1
Thread Starter
Join Date: May 2007
Posts: 23
Total Cats: 0
Default n00b dyno tuning question.

I have a begi S1 and I wanted to dyno the car to see where it is at. The guy at the shop suggested I do an hour of tuning instead of just doing 3 pulls, but I'm not sure that would be useful since I'm running stock injectors with a basic rising rate fuel pressure regulator. Right now the FPR is turned up as high as it will go for the boost that I have so I can't exactly tune that much. So what exactly would I tune without an engine/fuel management unit?

Would there be any timing retarding that I should do? I haven't changed the timing since I put the turbo in. I'm running 6-7psi.

Any guesses as to how much hp I will put down?

Last edited by Jeff25rs; 05-21-2009 at 06:17 PM.
Jeff25rs is offline   Reply With Quote

Related Topics
Thread Thread Starter Forum Replies Last Post
Why dynos should plot Torque divided by MAP JasonC SBB ECUs and Tuning 11 10-27-2015 05:56 PM
Expected intake temps on the track? tazswing Race Prep 20 10-03-2015 12:04 PM
Back to Stock Part Out!! Turbo Parts, MS2 Enhanced 01-05, Suspension, and MOAR! StratoBlue1109 Miata parts for sale/trade 16 10-02-2015 10:39 AM
Time to start learning and play with tuning The Gleas MEGAsquirt 3 10-01-2015 10:30 AM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -4. The time now is 07:57 PM.