OBDII, Piggyback, and having fun with EGO
Thread Starter
Joined: Jul 2006
Posts: 12,659
Total Cats: 134
From: atlanta-ish
OBDII, Piggyback, and having fun with EGO
So here's the plan. 99 BEGi S4. Xede piggy/interceptor and stock PCM. Car must pass OBDII emissions once per year.
Parts to be aquired:
3" Enthuza exhaust, no cat in midpipe.
Innovate LC1
Program LC1 output 1 to offset stoich to 15.7 and run to PCM primary o2 input. Car will run a little lean in closed loop but stock PCM will be none the wiser.
Program LC1 output 2 to offset stoich to 16.0 and run to PCM secondary o2 input. Car will run without cat, but the PCM's cat efficiency monitor will have no idea.
Will need to either leave stock narrowband sensors bundled under the car or figure out what resistors will be required to eliminate heater open CELs.
Will also require retaining a 2nd LC1 to integrate into Xede.
Thoughts?
Parts to be aquired:
3" Enthuza exhaust, no cat in midpipe.
Innovate LC1
Program LC1 output 1 to offset stoich to 15.7 and run to PCM primary o2 input. Car will run a little lean in closed loop but stock PCM will be none the wiser.
Program LC1 output 2 to offset stoich to 16.0 and run to PCM secondary o2 input. Car will run without cat, but the PCM's cat efficiency monitor will have no idea.
Will need to either leave stock narrowband sensors bundled under the car or figure out what resistors will be required to eliminate heater open CELs.
Will also require retaining a 2nd LC1 to integrate into Xede.
Thoughts?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
elesjuan
Build Threads
7
Nov 3, 2015 01:51 PM
