Singular Motorsports ECU Brackets
Reply
0
0
Senior Member
Joined: Dec 2007
Posts: 1,459
Total Cats: 132
From: ATL
HORRORS, NO!! The only way I could figure out how to remove the top bolt of the OEM ECU location was after I had removed the dash! I could feel the f**ker, but just couldn't get a wrench on it.
Reply
0
0
Senior Member
Joined: Mar 2011
Posts: 697
Total Cats: 27
From: South Chicago
Yeah if your doing them for rev built units I'm sold! I ended up making my own metal bracket and it works well but it's in sucha tricky position it's a PITA to connect the serial cable to on/off.
Reply
0
0
Just to note here, you have the older-style Enhanced MS2, which is using the MS3x enclosure.
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
The adapters for Reverent ECUs are designed and in the queue for production, we should have pieces to test fit beginning of this coming week. 
-Ryan
-Ryan
Reply
0
0
that's awesome. I have a Rev MS2 (not sure which generation). I'm hoping you've got something that will work for me. Worst case I pop a couple of holes in the case and screw it all together, right?
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
-Ryan
Reply
0
0
I just did this last week, and it was one of the easiest things ever. took literally 25 seconds per nut. maybe get proper tools?
Reply
0
0
The top nut was definitely the hard one for me too. Plain 10mm box wrench did it for me in the end, but it was a huge pain, and it took forever to figure out I had to pry the plastic wiring loom anchor off the end of the stud first.
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
The 90-93 bracket is available now. I'm planning to design the 99+ bracket late November.
The adapter brackets for Reverent ECUs are almost finished. Those adapters secure those ECUs (which do not normally have any mounting tabs on them) to Singular Motorsports ECU brackets - whether it's the 90-93 or 99+ bracket the adapters will work for both. You buy the bracket appropriate to your year, and if you have a Rev ECU contact us directly for the adapters. It wouldn't make sense to design a whole new bracket just for those ECUs.
-Ryan
The adapter brackets for Reverent ECUs are almost finished. Those adapters secure those ECUs (which do not normally have any mounting tabs on them) to Singular Motorsports ECU brackets - whether it's the 90-93 or 99+ bracket the adapters will work for both. You buy the bracket appropriate to your year, and if you have a Rev ECU contact us directly for the adapters. It wouldn't make sense to design a whole new bracket just for those ECUs.
-Ryan
Reply
0
0
Thread Starter
Joined: Jul 2006
Posts: 3,310
Total Cats: 1,236
From: San Diego
Hey guys, sorry for the delays! It's been equal parts due to the holidays as well as having a C7 Stingray come in for some product development with a tight deadline
Reverent ECU:
I've made up the Reverent ECU adapter tabs that should allow MSLabs ECUs to fit Singular Motorsports ECU brackets. It turned out that our local guy with a Rev ECU had one of the old-style behemoth units *note: there is no hope for those to fit our brackets, sorry to those who have that model* so we just need to confirm the tabs do indeed work. Anyone who is up for purchasing a bracket through Good-Win Racing, I can mail the tabs direct to you if you'll confirm fitment for us
99+ bracket
Working on the design for this one, but having to work that around the C7 stuff and a few other higher priorities, so I don't want to make any hard guarantees on when they will be released yet.
-Ryan
Reverent ECU:
I've made up the Reverent ECU adapter tabs that should allow MSLabs ECUs to fit Singular Motorsports ECU brackets. It turned out that our local guy with a Rev ECU had one of the old-style behemoth units *note: there is no hope for those to fit our brackets, sorry to those who have that model* so we just need to confirm the tabs do indeed work. Anyone who is up for purchasing a bracket through Good-Win Racing, I can mail the tabs direct to you if you'll confirm fitment for us
99+ bracket
Working on the design for this one, but having to work that around the C7 stuff and a few other higher priorities, so I don't want to make any hard guarantees on when they will be released yet.
-Ryan
Last edited by ThePass; Dec 2, 2014 at 09:45 PM.
Reply
0
0
Bracket is on it's way from Goodwin!
So are the brackets for a Rev PNP MS3 unit (I don't consider the original units PNP, since they use a patch harness).
Should be tested by the 9th or 10th I hope, if Oregonmon is back in town, might not be until the 13th/14th.
This is all assuming both pieces arrive by then in this cluster **** of a shipping month.
So are the brackets for a Rev PNP MS3 unit (I don't consider the original units PNP, since they use a patch harness).
Should be tested by the 9th or 10th I hope, if Oregonmon is back in town, might not be until the 13th/14th.
This is all assuming both pieces arrive by then in this cluster **** of a shipping month.
Reply
0
0
