where is the power window wiring?
 

I have a 92 with manual windows, and am looking for the power steering harness so that I can wire my LC-1 to it's switched +12v. I pulled the carpet out, expecting it to be near the rear console... but nothing. I understand that the +12v is black/white, but I don't see it anywhere.

Any idea where it is?

Justin

Wiring only goes to the door jam on a manual window model, not the console.

Fsm:

Ah I need an FSM! Looks like the harness ends behind the center console. I'll take another look there.

Still not seeing it. I would have expected it to be wound up in the same bundle that carries the wiring for the radio, heater, emergency brake, etc. But I don't see any extra connectors there that have a black/white wire.

My 94 has manual windows but has the power window harness plug under the center console right next to the shifter. It's not behind the stereo/dash if that's where you've been looking. I'm using its +12V and GND to power a dual oil & water temp gauge.

I power the LC-1 from the same wire that powers MS, and they are grounded at the same point (by the TB). It's a good idea to minimize any differences in voltage between your ECU and WBO2.

That's where I expected it to be, but it's not. I took the carpet and seats out to be sure!

Do you remember how many wires where on the connector?