is 15 psi crazy or stupid?
More timing = higher chance of breakage if you have detonation. More timing also can = detonation.
With your conservative tune, you might only be making 180-190whp at 15psi... but you could achieve that same 190whp at 10psi with a less conservative but more optimal tune. That same "optimal" tune at 15psi will get you closer to the 220whp accepted upper limit of a GT25r on a stock 1.6.
I'd rather run a better tune at lower boost... better tune means quicker spool and smoother overall operation. I'd spend a couple hundred bucks to have a good tuner put it on a dyno and tweak you a couple good maps... I bet you'd find that right now, you could have more power on less boost with a still acceptable margin for safety, better engine response, and better overall reliability.
I'd rather run a better tune at lower boost... better tune means quicker spool and smoother overall operation. I'd spend a couple hundred bucks to have a good tuner put it on a dyno and tweak you a couple good maps... I bet you'd find that right now, you could have more power on less boost with a still acceptable margin for safety, better engine response, and better overall reliability.
Reply
0
0
Well she is runnign well. 15psi is nice. I hit it about 4k I was hoping it would be sooner. I am trying to tune it to hit around 3500 but no luck yet.
The boost drops down over 6k so I have turned up the duty cycle on the ebc solinoid there and it only drops to 13psi.
anywayn its great very fast
The boost drops down over 6k so I have turned up the duty cycle on the ebc solinoid there and it only drops to 13psi.
anywayn its great very fast
Reply
0
0
If you're not hitting 15psi until 4k rpm, there is something wrong with your setup. You should be fully spooled at least 500rpm earlier... maybe as much as 750rpm, but it's good to see that you know that.
What exhaust are you running?
Maybe if you posted up your fuel/spark tables, somebody could help see if there's a big hole somewhere in it.
What exhaust are you running?
Maybe if you posted up your fuel/spark tables, somebody could help see if there's a big hole somewhere in it.
Reply
0
0
I'm with Sam, on that turbo you should be hitting 15psi much sooner, even on a 1.6. You may want to check over your charge piping and make sure you don't have a boost leak somewhere.
Reply
0
0
Well she is runnign well. 15psi is nice. I hit it about 4k I was hoping it would be sooner. I am trying to tune it to hit around 3500 but no luck yet.
The boost drops down over 6k so I have turned up the duty cycle on the ebc solinoid there and it only drops to 13psi.
anywayn its great very fast
The boost drops down over 6k so I have turned up the duty cycle on the ebc solinoid there and it only drops to 13psi.
anywayn its great very fast
Sam he has swizzle stick size exhaust.
For a reference data point, with my GT3071 at 4000RPM in my 1:1 gear I was at 20psi.
With my Borg S366 in my 1:1 gear at 4000RPM I am at about 15psi
In technical terms that means I rape your face. Spool can greatly vary by your boost control method. Also the length of your boost signal line can affect spool by 500RPM. Same with location... All this tuning stuff has a LARGE impact and is often overlooked.
Anyways this shi doesn't really matter because if you enjoy your car you enjoy it.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
Oct 26, 2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
Sep 30, 2018 01:09 PM
