2001 NB cams...
anybody know where to find some badass camshafts for a N/A NB??? I just ordered the fidanza cam gears. Thats not all I wanted but I had trouble finding camshafts :skid:
|
Maruha.
|
Ok..so they werent hard to find..about 700 for the pair I see. what else is needed or do these bad boys drop right into the vvti motor
|
A shim under bucket conversion.
|
Originally Posted by Love~My~MX5
(Post 535267)
Ok..so they werent hard to find..about 700 for the pair I see. what else is needed or do these bad boys drop right into the vvti motor
|
Dude...my 2001 has vvti. I can at least point out that much. Im not boosted.
|
Try Webcam. They should have camshafts for less than $700.00.
A cam swap is not too difficult. |
Originally Posted by Love~My~MX5
(Post 535443)
Dude...my 2001 has vvti. I can at least point out that much. Im not boosted.
|
Hint: Drop the i
|
Originally Posted by Love~My~MX5
(Post 535443)
Dude...my 2001 has vvti. I can at least point out that much. Im not boosted.
Youre also going to need EMS, in case you didnt know, which is possible since youre so retarded. |
lulz
|
web cams that ive seen are only for the 99 and 00 models unless there is something you guys know that the sales person does.. got a link??
|
You are right about that. Wedcam does not show vvt cams available. My bad.
I assume you contacted Integral Cam? I here Integral has a quality product, but I have never done business with them. My next camshaft will come from them. They show 2002 and later camshafts available on their site. |
Ya, I called integral a few days ago and they redirected me to someone else who gave me the same answers. "no cams for the vvt miata". I could send mine in to be redone for the price of new billets... FUCK THAT.
|
Do not be too apprehensive of sending in your cams or a spare set to be redone. All good cam manufacturers are capable of the procedure.
If a billet is not available for a particular cam, the cam manufacturer will reweld material back to your cam and then regrind to make higher lift and more duration. It adds some work on their end, so it is a task that is often more expensive than new cams. If they do it correctly, they can maintain the base circle which makes setting up the valvetrain less of a hassle. |
Integral makes VVT cams... they're listed on their website :bang: you fail
1.8 Mechanical Lifter Cam Profiles, 2002-2005 engines with variable intake valve timing Profile Seat Duration .050" Duration Cam Lift Stock (intake/exhaust) 242° / 244° 207.9° / 210.4° .370"/.350" (9.40 mm/8.89 mm) Stage 1 (intake/exhaust) 252° / 254° 213.8° / 215.7° .373"/.365" (9.47 mm/9.27 mm) Picture of VVT cam on left http://www.integralcams.com/Miata20.jpg . |
Originally Posted by Doppelgänger
(Post 535818)
Integral makes VVT cams... they're listed on their website :bang: you fail
1.8 Mechanical Lifter Cam Profiles, 2002-2005 engines with variable intake valve timing Profile Seat Duration .050" Duration Cam Lift Stock (intake/exhaust) 242° / 244° 207.9° / 210.4° .370"/.350" (9.40 mm/8.89 mm) Stage 1 (intake/exhaust) 252° / 254° 213.8° / 215.7° .373"/.365" (9.47 mm/9.27 mm) Picture of VVT cam on left http://www.integralcams.com/Miata20.jpg . well sure, Ive seen all these but I have a 2001 bro.... I do appreciate it but the listing is for 2002-2005... difference?? you seem to know. I had called them and they didnt seem to have anything for me by what they said. |
No difference in 2001 and 2002 engine wise.
|
if so then thats great to know...just wanted to be positive on that
|
Originally Posted by Love~My~MX5
(Post 536887)
well sure, Ive seen all these but I have a 2001 bro....
I do appreciate it but the listing is for 2002-2005... difference?? you seem to know. I had called them and they didnt seem to have anything for me by what they said. Get with the program...son. Yeah, you might think I'm being an asshole....but also remember that I am giving you the correct information. |
All times are GMT -4. The time now is 08:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands