92 Miata with COP starts then dies
 

Hiii


I made my own COP kit following the style of fab9. Using denso 2 wire pencil coils and an audi 4 channel driver. current issue is that it starts right up and then dies right away.

I have the brown/yellow and brown wires from the stock ignitor plug going to the 1-4 and 2-3 spots for the driver, the blue for the +12v, and black is ground. The black/white and yellow/blue arent hooked up, but they are just for the tach right?

Any assistance would be great.

nothing?