ACL race bearings I ordered for my engine build came stacked...
#8
Email from ACL:
"Can I suggest that you:
1 Gently ease the shells apart
2 Check for scratches on the bearing ID and ODs
3 When fitting the bearings into the rod halves ensure there is sufficient retention pressure to hold the bearings in place.
If Ok then these bearings will operate as designed. "
I opened the wrap and test fit them on the rod halves and they look like they will work.
"Can I suggest that you:
1 Gently ease the shells apart
2 Check for scratches on the bearing ID and ODs
3 When fitting the bearings into the rod halves ensure there is sufficient retention pressure to hold the bearings in place.
If Ok then these bearings will operate as designed. "
I opened the wrap and test fit them on the rod halves and they look like they will work.
Thread
Thread Starter
Forum
Replies
Last Post
elesjuan
Build Threads
9
11-14-2018 12:18 PM
hi_im_sean
Miata parts for sale/trade
1
09-16-2015 12:45 PM
SuperSneakySecretSquirrel
Meet and Greet
5
09-06-2015 08:30 PM