Brass Oil Galley Plug Sealant
About to install new brass oil galley plugs. Do I need to apply some silicone/rtv or special sealant before driving the plugs in place? Or just install them dry?
|
I used red loctite. Silicone or aviation sealer would probably work as well. They are pressed in with a fair amount of interference fit.
|
I ended up using red Locktite. It was a real tight interference fit.
|
All times are GMT -4. The time now is 01:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands