DIY CXRacing FMIC
#1
DIY CXRacing FMIC
thought i would give someone an idea of our ordeal
out of the intercooler comes two silicone elbows 2.5in/2.25out
the size for the TB is 2.5 so you'll need another 2.5 to 2.25 elbow
and the turbo side, it depends on your turbo.
mine is a t-28 si i needed a 2" to 2.25" elbow.
hope this helps someone as when i was looking for ideas i coudn;t find any...and found this to be super clean.
it will eventually be welded as much as possible.
more updates
FMIC install
pipe size : 2.25
CXRacing Intercooler
took 9 hrs..wtf?
out of the intercooler comes two silicone elbows 2.5in/2.25out
the size for the TB is 2.5 so you'll need another 2.5 to 2.25 elbow
and the turbo side, it depends on your turbo.
mine is a t-28 si i needed a 2" to 2.25" elbow.
hope this helps someone as when i was looking for ideas i coudn;t find any...and found this to be super clean.
it will eventually be welded as much as possible.
more updates
FMIC install
pipe size : 2.25
CXRacing Intercooler
took 9 hrs..wtf?
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM