Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)
-   Engine Performance (https://www.miataturbo.net/engine-performance-56/)
-   -   does 64mm throttle body needs intake manifold inlet to be bored to same size? (https://www.miataturbo.net/engine-performance-56/does-64mm-throttle-body-needs-intake-manifold-inlet-bored-same-size-72232/)

psyber_0ptix 07-13-2016 03:01 PM

Oh snap, I have no more excuses. Looks like I'll have to do my fuel upgrades sooner than later too.

MintyTheEunos 07-15-2016 06:21 AM

6 Attachment(s)
Right it's all fitted and running sweet with no leaks. Sure feels like less pedal makes more throttle due to the bigger butterfly which is fun. Not sure if it will gain any peak power but time will tell! Looks cool none the less Attachment 176527

Slight whistle at part throttle due to resonance down the channel to the idle control valve (from reading a post on here) but barely audible over the exhaust and choo choo

Attachment 176528

Attachment 176529

Attachment 176530

Attachment 176531

Attachment 176532

EO2K 07-15-2016 02:47 PM

This sounds like content that should be in a build thread ;)

MintyTheEunos 07-15-2016 04:11 PM


Originally Posted by EO2K (Post 1346597)
This sounds like content that should be in a build thread ;)

Done it. 144 views and one comment. Meh :(

It's looooong and not bandwidth friendly :D
Andy
;)

MintyTheEunos 07-21-2016 01:50 PM

2 Attachment(s)
Well the results are in and it's not what I expected at all. The car felt quicker and we will see why in a minute. I'm pretty sure it's all gone back together as it should with no boost leaks so let's go on the assumption that this is the case.

Today was hotter and a lot stickier than last run but I had a chance to get down so had to take the opportunity.

Peak torque and power figures were down from last time I'm sad to say (-5hp and -7Nm). I was mortified by this I'll be honest. The guys at the garage said that the hot and muggy conditions will have accounted for this and a freeer flowing mani won't be detrimental to peak power so read it as "makes no difference"

Not sure if they were trying to make me feel better but I'd have liked to have seen more or the same peak power. Never mind it's an experiment.

Anyway now for the exciting part. The engine makes loads more power as it comes onto boost now between 3 and 4k in fact it makes a huge lump in this area which is why it feels quicker.

I've tried to get a rough idea of figures but at 3.5k rpm it's making circa +17hp and +30Nm (22ft lb)

This is a result in my eyes big gains from quicker spooling makes for big fun. I'd like to see the peak power back but maybe on a crisper cooler day.

Sorry for the ramble it's been a long week.

Dyno sheet here

Attachment 183688


Attachment 183689





psyber_0ptix 07-21-2016 02:18 PM

Whatever, more power early on is a good trade off for marginal difference up top. I'd be happy with gains like that and the security of not having screws fly into a built motor.

MintyTheEunos 07-21-2016 02:38 PM


Originally Posted by psyber_0ptix (Post 1348036)
Whatever, more power early on is a good trade off for marginal difference up top. I'd be happy with gains like that and the security of not having screws fly into a built motor.

I agree especially for a road car. It really gulps in that boost and gets on its toes now. Overall I'm happy :)

lvw 07-23-2016 12:14 AM

Ok,I have the tb,now need a built motor to put behind it. Oh and some ac in the garage. Yes,wooos!

MintyTheEunos 07-24-2016 04:43 AM


Originally Posted by lvw (Post 1348501)
Ok,I have the tb,now need a built motor to put behind it. Oh and some ac in the garage. Yes,wooos!

Nice one. Are you porting out your inlet mmanifold?

lvw 07-25-2016 11:55 PM

Yes , but first must buy eurosquaretop, since this is a change I want to make


All times are GMT -4. The time now is 08:38 PM.


© 2024 MH Sub I, LLC dba Internet Brands