Fuel set up, and question on filter selection
09-16-2010, 07:41 PM
#1
Senior Member
Thread Starter
iTrader: (7)
Join Date: Dec 2006
Location: Chicagoland
Posts: 1,376
Total Cats: 4
Fuel set up, and question on filter selection
Just curious what everyone is running for their fuel system? Mine is
-6AN Line/Return
EARLS Inline Filter 85 Micron
Walbro 255 LPH in-tank pump
Walbro 255 LPH in-line pump
Aeromotive FPR w/Autometer pressure gauge
Flyin' Miata fuel rail
1200 CC Injectors
Now my question is: Is my stock screen on my in-tank pump, plus a 85 micron EARLS in-line fuel filter suffice? Or should I also run another filter pre-pump such as a 10-35 micron? I will be using E85, at around 70 PSI base pressure I am not even sure how much power this set-up will allow, suggestions?
-6AN Line/Return
EARLS Inline Filter 85 Micron
Walbro 255 LPH in-tank pump
Walbro 255 LPH in-line pump
Aeromotive FPR w/Autometer pressure gauge
Flyin' Miata fuel rail
1200 CC Injectors
Now my question is: Is my stock screen on my in-tank pump, plus a 85 micron EARLS in-line fuel filter suffice? Or should I also run another filter pre-pump such as a 10-35 micron? I will be using E85, at around 70 PSI base pressure I am not even sure how much power this set-up will allow, suggestions?
Last edited by jtothawhat; 09-16-2010 at 08:05 PM.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Motorsport-Electronics
ECUs and Tuning
0
09-05-2015 08:02 AM
