Originally Posted by 18psi
(Post 1096437)
PS: for what its worth, we could not get GM coils to not blow out past 21psi on Ryans beast. No matter what we did. Maybe he wired wem wrong or something, but he went through 2 sets and like 3 or 4 wiring harnesses and still no bueno past 21psi
|
did you guys have overboost turned on at 21psi or something?
|
1 Attachment(s)
I hope this clears the air about them being PNP for the 01+ cars.
The new MSM version on the left, and the previous (all other applications) on the right. https://www.miataturbo.net/attachmen...ine=1390936757 The standard coils we were shipping fit perfectly in the 01+ VVT cars but the feedback was that due to the powder coating on the MSM cars the fitment was a bit too firm. Since then we've made a revision and offered to upgrade anyone who had already purchased the previous "firm fitting" version. |
Originally Posted by Savington
(Post 1096451)
That's funny, since I've run Toyota coils at that boost level with no issues and GM LS2T coils are way more powerful. We ran a set of LS coils at .070" plug gaps until the plugs gave up ~500 miles later.
Originally Posted by Braineack
(Post 1096453)
did you guys have overboost turned on at 21psi or something?
I know most have good results with them just sharing my feedback. |
Originally Posted by 18psi
(Post 1096456)
I have no idea. Like I said, maybe all the harnesses or sets of cops were defective, but the 2nd set he ran authentic ones not some knockoff or anything, with proper magnecor wires and everything.
I know most have good results with them just sharing my feedback. |
They were the LS coils, the hottest ones that everyone here nuts about.
anyways back on topic: FAB9 is now a supporting vendor, that's cool :party: |
Originally Posted by 18psi
(Post 1096464)
They were the LS coils, the hottest ones that everyone here nuts about.
anyways back on topic: FAB9 is now a supporting vendor, that's cool :party: Needs more these. Aem High Output IGBT Inductive Smart Coil Authorized Dealer Full Warranty 4 Pack | eBay |
Originally Posted by 18psi
(Post 1096464)
They were the LS coils, the hottest ones that everyone here nuts about.
anyways back on topic: FAB9 is now a supporting vendor, that's cool :party: I've actually got a set of these but opted to do my own harness so they are not installed yet, so I do have a horse in this race. Bryan and I traded about 40 emails about these and hunting down the connectors so I've been impressed thus far. If I can dig up some TXL I'll be installing these over the weekend. |
Originally Posted by EO2K
(Post 1096435)
Erat: Thanks for the drama-free feedback. Are the pencils actually screwed into the terminals at the tops of the plugs?
|
All times are GMT -4. The time now is 06:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands