I am going to change my ic in a couple of days...I would like to know if an ic with overall dimensions of
• Overall Length: 750mm

• Overall Height: 340mm

• Front/Back Depth: 80mm

will fit in my nbfl...
Any help would be appreciated..thank you very much,

Zak

 

That might be abit to wide on an NA i dunno if the NB's have more room or not.

 

The only obstacle is the AC drier, but any AC shop can relocate it. Max width with the drier's stock location is ~25"/635mm if you're over 8"/200mm in height. Those are general guidelines working within stock configurations.

 

why such a large IC?

 

Boost, lots of it.

 

from a 2560 on a 1.6L

 

Dont hate on the huge IC for the 1.6
[IMG][/IMG]

Ive never seen over 130 IAT when it was over 105 at the track.

 

Yez.

 

Finally i bought an 65x34x8 ic and in a couple of days we ll find out what's the result...stay tuned...