nkess

I have a 99 miata with A/C and i was told the mishimoto radiator would fit with no problem.....there is a problem, about an inch and a half problem. The radiator is hitting the A/C condenser which is holding the radiator closer to the engine to where the tabs that hold it in place on the top are about an inch to an inch and a half away.... any suggestions? if you have one in place please post a pic. thanks!

BarbyCar

iTrader: (1)

nkess
Newb

Join Date: Mar 2009
Posts: 1
Feedback: 0 / 0%

What, no kiss? Just ram it right in with no lube. (i.e. how about an intro with those fries?)

AutoFreak57

iTrader: (3)

unbolt the top bolt on the condesor that holds it to the car. Bend the mounting tabs forward. Bolt condensor back on and check clearance. Repeat till it fits.

But yes, intro thread next time would be good

Rallas

iTrader: (9)

We had the same problem on my dads 99 with CXRacing rad. Just bend the tabs till it fits.

AutoFreak57

iTrader: (3)

Because I'm nice, here is the pic from my build thread showing the tabs you need to bend

nkess

Hey guys just wanted to say thanks for the help and sorry for not giving an intro. this is only the second time i have ever started a thread any way i was about to throw the radiator through my garage door but decided to Ask for help first. any way thanks again!!!!!