note on supertech spring set
https://cimg1.ibsrv.net/gimg/www.mia...fba3e12189.jpgWhile the instructions specify that you don't need the oem spring shims. I found that in order to get proper installed height and seat pressure the oem shims were needed on both of my project heads... so don't throw them out or loose one (like I did, because you might just need to use them after you do your post valvejob measurements).
|
All times are GMT -4. The time now is 08:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands