note on supertech spring set

Reply Subscribe

Thread Tools

Search this Thread

07-14-2017, 07:06 PM

gtred

Junior Member

Thread Starter

Join Date: Apr 2011

Location: Oregon

Posts: 301

Total Cats: 4

note on supertech spring set

While the instructions specify that you don't need the oem spring shims. I found that in order to get proper installed height and seat pressure the oem shims were needed on both of my project heads... so don't throw them out or loose one (like I did, because you might just need to use them after you do your post valvejob measurements).

Last edited by gtred; 07-14-2017 at 07:21 PM.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last