Miata Turbo Forum - Boost cars, acquire cats. - PN for block to VVT oil feed banjo bolt & gaskets?

- Engine Performance (https://www.miataturbo.net/engine-performance-56/)

- - PN for block to VVT oil feed banjo bolt & gaskets? (https://www.miataturbo.net/engine-performance-56/pn-block-vvt-oil-feed-banjo-bolt-gaskets-71475/)

Quote:

Originally Posted by Savington (Post 988079)

Block banjo bolt (small): 9YA3-51-001C
Block banjo bolt washers x2: 9956-21-000

Upper banjo bolt (big): 9YA3-41-601
Upper banjo bolt washers x2: ZL09-10-333

Thanks for helping out at T25 :makeout:

Quote:

Originally Posted by aidandj (Post 1385790)

Thread necro. But I kept running into this thread while searching, so hopefully this helps someone out in the future.

The banjo bolt is M16x1.5.

Thread necro^2
This is beautiful spoon fed information however when ordering these part numbers from a dealer I was emailed- "In regards to part # 9YA3-41-601 is no longer available through Mazda."
So do we/can we find out what the length of that large upper -601 banjo bolt is so it can be sourced in a different fashion? I couldn't find any information online and NJ FB page wasn't helpful either. :dunno:

9YA3-41-601 shows as backordered, not NLA. Call Mazdacomp directly to see if it's NLA or if there's an ETA.

Quote:

Originally Posted by Savington (Post 1485422)

9YA3-41-601 shows as backordered, not NLA. Call Mazdacomp directly to see if it's NLA or if there's an ETA.

Will do Savington, thank you for the fast reply. I will report back if I have any troubles.

I called the local dealerships and the banjo @ the block is special order and costs 27 dollars, anyone know the specs on that banjo?