Squaretop gasket ??
02-23-2018, 06:05 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2016
Location: Orlando, FL
Posts: 381
Total Cats: 64
Squaretop gasket ??
Yes I searched;
The square top manifold gasket # BP6Z-13-135 seems a bit hard to find in stock in the states.
What is everyone using for the gasket between upper and lower?
Silicone? Making own paper?
Seems like on a track car or toy it will be disassembled quite a bit and need to be reusable?
Thanks.
The square top manifold gasket # BP6Z-13-135 seems a bit hard to find in stock in the states.
What is everyone using for the gasket between upper and lower?
Silicone? Making own paper?
Seems like on a track car or toy it will be disassembled quite a bit and need to be reusable?
Thanks.
Reply
0
0
02-23-2018, 06:20 PM
#2
MZ-BP6Z-13-135 - Mazda gaskets - intake manifold plenum. Bill may not have it "in stock" but it doesn't take him long to get it to you.
Last edited by bahurd; 02-23-2018 at 07:32 PM.
Reply
1
1
02-23-2018, 09:16 PM
#3
Junior Member
Thread Starter
Join Date: Jul 2016
Location: Orlando, FL
Posts: 381
Total Cats: 64
For some reason my work computer did not like that website host? Fine at home & didn't know the viability of the sight.
Odd that pictured gasket does not enclose the runners and block the EGR cross passage between runners and across manifold?
Seems like the gap would create turbulence and flow issues? Part of the reason I was wondering if track guys that have EGR blocked anyway are just using silicone gasket maker?
Odd that pictured gasket does not enclose the runners and block the EGR cross passage between runners and across manifold?
Seems like the gap would create turbulence and flow issues? Part of the reason I was wondering if track guys that have EGR blocked anyway are just using silicone gasket maker?
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
