BTW, I got the 84mm in 8.6:1
|
Jason and I just returned from picking up our set of pistons from supertech directly. It was just a little extra but worth not going through the headache of shipping and possible errors in the piston size.
There front office displays are sick! |
Anybody know why the part number for 79mm low and high compression pistons is the same?
|
Good to hear you both got the pistons in hand.
Know any place in the bay area that's good at tuning miatas? |
gospeed81: The numbers are similar but not the same.
|
Halcyon, if your willing to drive a little to the south there are some really good tuning shops in hayward
|
Halcyon, Trackspeed Engineering tunes megasquirts.
|
I'll be using a e-manage blue.
I'll be willing to travel a little if they can tune it right. Been looking for one close by but no one in the city seems to dynotune. |
Halcyon if you spent all that money on pistons I'd spend more on an Adaptronic or a MS.
|
If you guys go over to Supertech ask them about the design of the piston face-- where the material is thin and dies (after detonation and piston melting). I talked with some guy there-- he sounded ethnic european.
|
I already have a emb still in it's plastic bag. I was going to use it w my pnp 99 head w/jrsc. But that blew up before I had a chance to install it. I'll probably upgrade to megasquirt when I decide to go turbo. But for now I'm trying to go low budget. My other projects might get jealous if I spend too much at once. Lol.
|
1 Attachment(s)
|
I guess they drop shipped.
I got the same ones. Anyone have the weights of the stockers handy? |
1 Attachment(s)
|
Originally Posted by Halcyon
(Post 507624)
gospeed81: The numbers are similar but not the same.
https://www.miataturbo.net/forum/t37356/#post433338 Which shows P4-MA790-N10 for both (with nearly 2 points of compression ratio difference!). I want to say this number is correct for the lower compression, and that the high compression pistons are just N1 at the end, but can't find anything with a websearch off the bat. I'll have to call. I DID just find some 8.5:1 compression pistons though...just need to check availability. |
holy double postage batman
|
n1 is 10.6:1
n10 is 8.8:1 just off this site i googled: Supertech Pistons - THMotorsports - Lowest Price Parts HKS Exhaust Apexi World Sport Koni Seibon Carbon Fiber ACT Exedy Clutch Skunk2 |
Talked to Adam at nolimitmotorsports...
Supertech DOES have the 8.5:1 78.5mm(1.6L +0.5) in stock. $380 shipped with rings. |
now..I'll be set if I can find a place that sell Supertech valve spring kit for good price.
JasonC SBB: are you going to have Steve Cardelli to build your motor? Looks like we have the same parts according to your post. - Jason |
Cardelli is a good 45 minute drive away for me.
I took my stuff to Victory Machine in SJ which is 10 minutes away. Pricier, popular with the local V8 crowd, but convenient. |
All times are GMT -4. The time now is 03:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands