Too much blow by
Long story short it all hapened after an attempt to retune my car and ever since white smoke escaping from exhaust and catch can, oil escaping from oil cap, and ran 2 quarters of oil in one week.
just wondering cz it was running straight until i decided to make it better ( overheating accures too after half an hour of highway after the attempt of retuning |
Oil was black when i changed it 2 days ago
|
What had you changed
|
Originally Posted by psyber_0ptix
(Post 1373838)
What had you changed
|
Originally Posted by psyber_0ptix
(Post 1373838)
What had you changed
|
If by shut "on" you mean shut down.......really sounds like your timing was way outta wack and you had things glowing in the combustion chamber so the engine was "dieseling" after you turned the key off. It's toast....you probably melted the ring lands off the pistons.
|
Originally Posted by Bronson M
(Post 1373896)
If by shut "on" you mean shut down.......really sounds like your timing was way outta wack and you had things glowing in the combustion chamber so the engine was "dieseling" after you turned the key off. It's toast....you probably melted the ring lands off the pistons.
|
I had my afr at 11.5 at 10 psi and was running supper fine until the retuning attempt
|
Base map probably fucked it up cz the tuner had to reevent all the timing and fueling table
|
What base map did you get? I am running the timing map from Diy and it works great.
|
Originally Posted by chrisabidaoud
(Post 1373913)
I had my afr at 11.5 at 10 psi and was running supper fine until the retuning attempt
|
Originally Posted by ryansmoneypit
(Post 1373990)
What base map did you get? I am running the timing map from Diy and it works great.
|
Originally Posted by dr_boone
(Post 1374000)
crazy question but if it was running fine why would you start over tuning?
|
Had good tune
Loaded basemap without understanding what changes were being made Blew up motor in a week |
All times are GMT -4. The time now is 02:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands