This is why you change your oil
6 Attachment(s)
Customer brought their car in today to try and get some stuff covered under warranty, nice try buddy. They claim it has an excessive rattle on startup, check engine light and also a leaking valve cover.
Well when I originally started the car after it sat awhile I nearly shit myself, sounded like the rods were about to shoot out of this thing. After I pulled it in the shop I did two things 1) checked the dip stick, 2) removed oil cap. My first sign was their attempt to "clean" the dipstick. 2 small indicators, for low and full, were full of crap that they had left behind. You can't fool me :jerkit: After removing the cap I noticed build up in the cover that was "wiped" with a rag to get cleaned up. Again, nice try. After checking those two things I checked what this engine code was. Sure enough, stuck oil control valve. Time to have a peek :giggle: Sorry for the quality of some photos, hard to take pics on my phone with dirty hands https://www.miataturbo.net/attachmen...ine=1364514844 https://www.miataturbo.net/attachmen...ine=1364514844 https://www.miataturbo.net/attachmen...ine=1364514844 https://www.miataturbo.net/attachmen...ine=1364514844 https://www.miataturbo.net/attachmen...ine=1364514844 https://www.miataturbo.net/attachmen...ine=1364514844 |
looks delicious
|
You should have seen the crap I scraped off just to get the cover back on
|
What car? That's just crazy amounts of neglect. Somebody should report this guy/girl to CPS (Car Protective Service).
|
What engine is that from? 3 cylinder? How many miles?
|
This was a 08 Kia Sorento with a 3.8L.
|
Originally Posted by tuckermon
(Post 995254)
What engine is that from? 3 cylinder? How many miles?
|
KIA you say?
:giggle: |
Yeah i'm a master tech there, take it easy on me the pay is good and the work is easy lol not bad for a 21 year old :bigtu: Well... getting my masters now
While you bastards make bank I get discounted parts I could use on my miata, mainly HLA's (which I don't use) and $10 coolant reroute thermostat necks, well I guess the coolant neck is the only advantage of working there... |
Working on Kia's is its own reward. :giggle:
|
Yeah I don't talk about my job much lol I usually say I work at a dealer as a tech, now the secrets out :facepalm:
|
1 Attachment(s)
I'll cross post this, from CR.
Originally Posted by 2ndGearRubber
(Post 1666602)
My 94 is sludge proof. Why? Because 2k Rotella intervals.
https://www.miataturbo.net/attachmen...ine=1364516884 |
1 Attachment(s)
https://www.miataturbo.net/attachmen...ine=1364517059
I can't think of a hyundai/kia motor I really like. They just sound unhealthy after a while, a lot like a mitsu 4cyl. |
The v8 borrego, only made in 2009, has a ford 5.0 engine. That's the ONLY engine I like. Bastards will get it for a full size SUV
|
Kia/Hyundai used Mazda and Mitsu engines in a lot of their stuff.
|
Originally Posted by 2ndGearRubber
(Post 995273)
I'll cross post this, from CR.
|
because clubretard
|
1 Attachment(s)
Originally Posted by mgeoffriau
(Post 995288)
2k OCI with Rotella? WHY?
https://www.miataturbo.net/attachmen...ine=1364518471 EDIT: I've had the car for about 2000 miles (just hit 60k). It's had 4 oil changes, hunting for the right weight/brand. HLA tick is gone, and oil comes out clean. I'll likely be changing it in July after the first 4-5 events, regardless of the fact it'll only have about 1500miles on it. However, if it continues to stay clean, and have zero oil loss, I may stretch it out. Mainly, I always change before winter, and right after. Hoping for 0-30 rotella in the US as the rumors suggest. |
BTW, I have torn into an engine that was much worse than that one, but it had over 120k miles. It was a 4.3 Chevy and it actually had charcoal briquets (same size and consistency) between the rocker arms and under the intake manifold.
|
Originally Posted by mgeoffriau
(Post 995288)
2k OCI with Rotella? WHY?
|
All times are GMT -4. The time now is 05:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands