Havent updated here much. Been really busy with the fab work.
1.6 Vband Manifold tacked up. http://farm4.staticflickr.com/3666/1...09c73bdd_c.jpg Miata 1.6 Bottom Mount Vband Ramhorn by HellaFab, on Flickr I have the FE3 Miata manifold and downpipe done (besides WG) I just don't have a completed picture. This is all I have for now... http://farm6.staticflickr.com/5487/1...23b2810c_c.jpg FE3 Miata top mount manifold by HellaFab, on Flickr |
|
What do you charge for something like that ?
|
Im not an advertiser here.
If your interested, I will suggest that you contact me somehow ;) |
Been Busy. Havent posted much.
https://farm8.staticflickr.com/7083/...4896a0ea_b.jpg https://farm4.staticflickr.com/3695/...307314ac_h.jpg https://farm8.staticflickr.com/7039/...777a8e7c_h.jpg https://farm3.staticflickr.com/2889/...c4afa59a_h.jpg https://farm4.staticflickr.com/3810/...3f674c22_h.jpg Loving it. |
Nice!
|
Beautiful work as always!
|
One straight exhaust one muffled?
|
Originally Posted by M.Adamovits
(Post 1115128)
One straight exhaust one muffled?
|
One resonated, one muffled with large resonator.
Resonators work better with some piping after them (not at the back, near the tip) |
Havent updated my blogs lately.
Starting a custom intake manifold for the FE3 Miata. Hammer formed plenum over this form I have built. https://farm8.staticflickr.com/7300/...db06a2d9_z.jpgWood intake manifold plenum form by HellaFab, on Flickr Details: -Straight tuned length runners -thick aluminum for boost -turbo optimized plenum -hammer formed 2 piece plenum :) Stay tuned. |
Beautiful....so tempting
|
Runners welded on. Need to finish the plenum floor and then form the plenum halfs over the wood form that I have started.
The wood form needs a lot of shaping in the throttle area. https://farm8.staticflickr.com/7375/...231477a6_z.jpg Fe3 overhead by HellaFab, on Flickr https://farm8.staticflickr.com/7316/...55957499_z.jpg FE3 Large Port Intake Manifold Runner weld by HellaFab, on Flickr |
Oil pan nearly done.
Need to put an oil temp sensor bung and drain hole in it still. https://farm8.staticflickr.com/7460/...cd6273ec_z.jpgFe3 oil pan nearly done by HellaFab, on Flickr |
Nice! Inside (sump) shots?
|
I will have some later. the floor is fully welded, and the rest is stitched for structure.
|
Decided to get a good camera lens to show off all of the work I have coming up.
Here is another vband collector for a 1.6L hot side setup. https://farm4.staticflickr.com/3870/...22c363d8_z.jpg HellaFab Vband Collector by HellaFab, on Flickr |
Havent updated this since I started the manifold for that collector above.
Here is a few pictures of the process. The old hot side parts were just dropped off to make the downpipe, so its game time. Manifold is done besides the wastegate, which i will place after the downpipe is done. Pics: https://farm6.staticflickr.com/5595/...83cf2079_b.jpgHellaFab Miata Vband bottom mount manifold by HellaFab, on Flickr https://farm6.staticflickr.com/5566/...0d3f59fd_b.jpgHellaFab Miata Vband bottom mount manifold by HellaFab, on Flickr https://farm3.staticflickr.com/2908/...40be52c8_b.jpgHellaFab Miata Vband bottom mount manifold by HellaFab, on Flickr Should do pretty well. :) |
Sweet manifold. I like your jig/welding fixture.
|
Originally Posted by ahawks9er
(Post 1152896)
Sweet manifold. I like your jig/welding fixture.
|
All times are GMT -4. The time now is 04:32 AM. |
© 2024 MH Sub I, LLC dba Internet Brands