Thanks for the backup @wittyworks, @turbotim.
Originally Posted by Leafy
(Post 1162997)
It should, very very close to the actual location of the turbo on my car.
It will clear easily. the turbo is placed forward a bit of my TiAL Vband manifolds that already work on LHD Miata. Solid placement. I spent a whole day perfecting the placement and orientation of the jig JUST for the 1.6 engine. You should be able to tell how much effort was incorporated with the placement pictures I posted. Giant turbo no hit block, no hit frame, no hit steering rack. For those of us that do fab work you will know that is a lot of time to spend, but I needed to make sure that the jig is perfect before you can build a bunch off of it with repeatability. |
|
T2 divided downpipe for the 1.6 Miata manifold I built to fit both EFR and Garrett Turbos.
Wastegate divider still needs trimming, add an o2 bung and finish the inside weld that I was getting too shakey to finish... https://farm8.staticflickr.com/7468/...54332c38_c.jpgMiata 1.6 T2 Divided Downpipe by HellaFab, on Flickr https://farm8.staticflickr.com/7475/...c268e96b_c.jpgMiata 1.6 T2 Divided Downpipe by HellaFab, on Flickr |
Intake Manifold builds are about to begin... I have the designs on lock and a few ready to go!
Teaser of some of the bits... https://farm8.staticflickr.com/7545/...d6fea5b7_z.jpgVelocity stacks by HellaFab, on Flickr https://farm8.staticflickr.com/7570/...8d5ea743_z.jpgIntake manifold flanges for NB Miata by HellaFab, on Flickr The EFR/T2 hotside with a T2 5 bolt downpipe... https://farm8.staticflickr.com/7462/...79d70a8f_z.jpgEFR/T2 manifold with T2 5 bolt downpipe by HellaFab, on Flickr |
SICK!!!!
|
I got half a chub over here just looking at these. Can't wait till you get started on mine. Should have a deposit ready for you in the next few weeks!
|
Originally Posted by impulsive.ca
(Post 1193339)
I got half a chub over here just looking at these. Can't wait till you get started on mine. Should have a deposit ready for you in the next few weeks!
Do you have the wastegate yet? |
Fantastic work Matt! Look forward to see your intake manifolds. :)
|
Originally Posted by shlammed
(Post 1193586)
It will be a serious improvement over the existing super old begi kit you have. I can't wait to hear your thoughts on the car before and after.
Do you have the wastegate yet? |
Ive been busy! One more setup to do before Im all caught up to the current workload.
Ive spent a LOT of time and money over the last few months setting up my fixtures for Miata manifolds. My downpipe is the same with 1.6L and 1.8L now. Pretty obvious advantage. https://farm9.staticflickr.com/8620/...5c113a37_c.jpg Miata Turbo Manifold by HellaFab, on Flickr https://farm9.staticflickr.com/8584/...99105287_c.jpg Miata Turbo Manifold by HellaFab, on Flickr https://farm9.staticflickr.com/8570/...70577e26_c.jpg Miata Turbo Manifold by HellaFab, on Flickr https://farm9.staticflickr.com/8604/...72717aaa_c.jpg Miata Turbo Manifold by HellaFab, on Flickr https://farm9.staticflickr.com/8612/...df8345da_c.jpg Miata Turbo Manifold by HellaFab, on Flickr I appologize for the photo quality. I havent had a chance to sit down at my PC for a while, so Im using phone pictures :( |
Sweet!
|
Freaking beautiful work as always. Dat downpipe.
|
Originally Posted by turbofan
(Post 1210376)
Freaking beautiful work as always. Dat downpipe.
|
Nice belt sander BTW. Tilting?
|
Tilt. No oscillation
|
1 Attachment(s)
well done on my manifold/downpipe. welding gloves no longer needed for track days.
|
Thanks Berge!
Im still totally shocked that you were able to crack the TiAL turbine housing! |
2 Attachment(s)
Still in the process of installation, but gotta love Hellafab's great work.
Full EL Topmount manifold for T3, 3" Seperated DP and External WG Attachment 184091 Full 3" Turboback, highflow megnaflow cat and muffler. Attachment 184092 |
Hello Matt,
I've sent you several messages since receiving my intake manifold in hopes that you will come good for the $600 manifold I bought from you that did not fit. I paid an extra $250 from my own pocket an addition to buying your manifold in order to have it repaired. You've admitted that you used the wrong jig to make it and it did not have provisions to fit my car whatsoever. I'm sure this is all a misunderstanding but since you haven't replied to any messages since March 16th. I unfortunately have to take this to this forum. I trust you'll live up to your reputation and I'll hear from you shortly. |
Matt,
Still no word and I've been blocked from your @hellafabrication IG page as well. The world is a small place my fellow Canadian friend...one should be careful before making enemies. All the best Alex |
All times are GMT -4. The time now is 09:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands