Psuedo Group Buy, 10000 MFD Caps for COP
Thread Starter
Joined: Jul 2006
Posts: 12,659
Total Cats: 134
From: atlanta-ish
Psuedo Group Buy, 10000 MFD Caps for COP
First, PLEASE don't send me PMs. You can reply to the thread below. I'm not trying to be a dick, but I can't respond to the level of PMs I have now. They come in faster than I can reply and/or delete. 
Unpleasantries aside, I purchased extra capacitors from digikey. They are 10000MFD hi temp 16V. As per JasonCBB's findings, these caps will negate Vdrop caused by high current ignition systems retro installed on the miata. One needed per car.
Best price I could find locally was $9 and change. The caps are only $1.75 each through digikey, but digikey also charges a $5 handling charge, $5 freight, and sales tax. Which makes ordering a single cap cost $11.75 + tax.
Will sell at $3.40/each. I have calculated this to be my break even point (factoring in paypal fees and a USPS stamp), such that all involved get a cap at $3.40.
My paypal is benberusch at bellsouth dot net. Send me $3.40 + your name and shipping address and just post in-thread if you're in. I'm expecting them to come in around Friday, so I can put them in the mailbox Saturday. *Applies to anywhere USPS will ship to with a standard stamp. So all 50 states and military APO.
Ben
Unpleasantries aside, I purchased extra capacitors from digikey. They are 10000MFD hi temp 16V. As per JasonCBB's findings, these caps will negate Vdrop caused by high current ignition systems retro installed on the miata. One needed per car.
Best price I could find locally was $9 and change. The caps are only $1.75 each through digikey, but digikey also charges a $5 handling charge, $5 freight, and sales tax. Which makes ordering a single cap cost $11.75 + tax.
Will sell at $3.40/each. I have calculated this to be my break even point (factoring in paypal fees and a USPS stamp), such that all involved get a cap at $3.40.
My paypal is benberusch at bellsouth dot net. Send me $3.40 + your name and shipping address and just post in-thread if you're in. I'm expecting them to come in around Friday, so I can put them in the mailbox Saturday. *Applies to anywhere USPS will ship to with a standard stamp. So all 50 states and military APO.
Ben
0
Thread Starter
Joined: Jul 2006
Posts: 12,659
Total Cats: 134
From: atlanta-ish
0
Thread Starter
Joined: Jul 2006
Posts: 12,659
Total Cats: 134
From: atlanta-ish
https://www.miataturbo.net/forum/showthread.php?t=19780
http://search.digikey.com/scripts/Dk...me=493-1546-ND
http://search.digikey.com/scripts/Dk...me=493-1546-ND
Code:
Family Electrolytic - Aluminum Capacitance10000µF Voltage - Rated16V Tolerance ±20% Package / Case Radial Maximum Temperature -40°C ~ 105°C Lifetime @ Temp. 5000 Hrs @ 105°C
0
Thread Starter
Joined: Jul 2006
Posts: 12,659
Total Cats: 134
From: atlanta-ish
Installation: Solder the short lead to the ground and the long lead to the +12V on the main power wires going to your ignition.
Probably a good mod to do with any FI miata, unless you have something like a TEC with its big *** coils.
Probably a good mod to do with any FI miata, unless you have something like a TEC with its big *** coils.
0
Thread Starter
Joined: Jul 2006
Posts: 12,659
Total Cats: 134
From: atlanta-ish
Not to be a d!ck, but can I sent it to you as simply as popping a standard stamp on an envelope? I should have clarified in the first post...
0
Thread Starter
Joined: Jul 2006
Posts: 12,659
Total Cats: 134
From: atlanta-ish
0
