Feeler: BEGi Frankenstien Turbo Kit
10-10-2009, 02:40 AM
#1
Senior Member
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Big Bear Ca
Posts: 988
Total Cats: 8
Feeler: BEGi Frankenstien Turbo Kit
PICTURES!
I'm seriously thinking of picking up UrbanSoots motor. So I'm testing the intrest for my Turbo kit.
I am at work, I have no pictures and this is all of the top of my head. I would like to sell it all at once, but I will part it if I have buyers for everything. Cheaper if you buy it all at once though.
I bought the Turbo off of Rougezues it's a Garrett GT2560R Ar60 m24 turbo with ar64 oil/water cooled. Had it sent to BEGi and corky checked it out and said it was in good, but not perfect shape. Here is the original thread:
https://www.miataturbo.net/forum/t34429/
The intercooler was bought off a miata owner on CL, I thought of selling it earlier. Here is the sale thread:
https://www.miataturbo.net/forum/t33216/
The 440 pnp injectors were bought of a friend of Savington's, cleaned and flowed, once again here is a link to that thread:
https://www.miataturbo.net/forum/t32000/
It's a BEGi S kit that had some changes. The log mani is 1.8 (with EGR, I was just going to plug it, instead of ship it back to BEGi), and SSSGDP. I added SS lines, since I had a intercooler and was going to megasquirt it I deleted the crosover pipe and FPR. I didn't want to VTA so I added the 90* inlet to the TB and the crossover to the inlet to the compressor off the S4. If I'm not describing this correctely let me know and I will try to put up some pix.
The only thing I was waiting to get before I installed it, is megasquirt with sensors of choice, WB02, and rest of IC piping.
I don't see why this setup couldn't do 200 to 220WHP with a little headroom, that was my goal in chosing this set up. If anyone wants to pipe in on this, I would not be offended.
I don't have my reciepts with me but I think I have real close to 3K into this. I would like to get no less than 2k +shipping. It's all still in the box BEGi shipped it to me in.
I also have a Stock RB20DET t3 flanged (t28) turbo bought off splitime. Asking $200 shipped. Here is the thread:
https://www.miataturbo.net/forum/t32838/
I won't be home till Sunday or Monday, I will pull it all out and take pictures then.
Let me know if your interested.
I'm seriously thinking of picking up UrbanSoots motor. So I'm testing the intrest for my Turbo kit.
I am at work, I have no pictures and this is all of the top of my head. I would like to sell it all at once, but I will part it if I have buyers for everything. Cheaper if you buy it all at once though.
I bought the Turbo off of Rougezues it's a Garrett GT2560R Ar60 m24 turbo with ar64 oil/water cooled. Had it sent to BEGi and corky checked it out and said it was in good, but not perfect shape. Here is the original thread:
https://www.miataturbo.net/forum/t34429/
The intercooler was bought off a miata owner on CL, I thought of selling it earlier. Here is the sale thread:
https://www.miataturbo.net/forum/t33216/
The 440 pnp injectors were bought of a friend of Savington's, cleaned and flowed, once again here is a link to that thread:
https://www.miataturbo.net/forum/t32000/
It's a BEGi S kit that had some changes. The log mani is 1.8 (with EGR, I was just going to plug it, instead of ship it back to BEGi), and SSSGDP. I added SS lines, since I had a intercooler and was going to megasquirt it I deleted the crosover pipe and FPR. I didn't want to VTA so I added the 90* inlet to the TB and the crossover to the inlet to the compressor off the S4. If I'm not describing this correctely let me know and I will try to put up some pix.
The only thing I was waiting to get before I installed it, is megasquirt with sensors of choice, WB02, and rest of IC piping.
I don't see why this setup couldn't do 200 to 220WHP with a little headroom, that was my goal in chosing this set up. If anyone wants to pipe in on this, I would not be offended.
I don't have my reciepts with me but I think I have real close to 3K into this. I would like to get no less than 2k +shipping. It's all still in the box BEGi shipped it to me in.
I also have a Stock RB20DET t3 flanged (t28) turbo bought off splitime. Asking $200 shipped. Here is the thread:
https://www.miataturbo.net/forum/t32838/
I won't be home till Sunday or Monday, I will pull it all out and take pictures then.
Let me know if your interested.
Last edited by dstn2bdoa; 10-17-2009 at 01:25 AM.
Reply
0
0
10-17-2009, 05:17 PM
#6
Senior Member
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Big Bear Ca
Posts: 988
Total Cats: 8
^^HaHa
I'm going to keep this as a kit for now. I don't want to end up with a bunch of misc. pieces. I'll throw it up on Egay, and CL, if no luck I may start parting.
That is, unless every piece is accounted for, then parting is not a problem.
Thanks for the interest.
BTW I'll deliver to most of the LA area without charge! Save on shipping.
I'm going to keep this as a kit for now. I don't want to end up with a bunch of misc. pieces. I'll throw it up on Egay, and CL, if no luck I may start parting.
That is, unless every piece is accounted for, then parting is not a problem.
Thanks for the interest.
BTW I'll deliver to most of the LA area without charge! Save on shipping.
Reply
0
0
10-26-2009, 07:11 PM
#11
Senior Member
Thread Starter
iTrader: (18)
Join Date: May 2008
Location: Big Bear Ca
Posts: 988
Total Cats: 8
Bump for price drop. $1800+shipping.
Seems everyone is selling their kits, figured I need to be a little more competitive. I have a deposit on Urbansoots high compression 2.0. So let the money start rolling in.
Not going to split it up yet.
Seems everyone is selling their kits, figured I need to be a little more competitive. I have a deposit on Urbansoots high compression 2.0. So let the money start rolling in.
Not going to split it up yet.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
Frank_and_Beans
Supercharger Discussion
13
09-12-2016 08:17 PM
