Miata Turbo Forum - Boost cars, acquire cats.
Share Your Pictures with Our Community. Upload Now
0 2026/03/28 08:33:34
0 2026/03/28 08:33:30
0 2026/03/28 08:33:23
0 2026/03/28 08:33:15
0 2026/03/28 08:33:04
0 2026/03/27 16:48:47
0 2026/03/27 13:59:38
0 2026/03/27 13:59:02
0 2026/03/27 13:55:08
0 2026/03/27 13:55:05
0 2026/03/27 13:55:02
0 2026/03/27 13:54:59
Advertisement
Datalog from 1-2 pull
Datalog from 1-2 pull
0 2026/03/27 12:29:56
0 2026/03/27 08:27:12
0 2026/03/26 23:30:49
03.26.26 Update: I forgot to upload this picture. Poor bird didn’t fly out of the way when I was cruising. Picture was taken on 03.13.26 on my way to Lake Berryessa when I drove ~220miles to run down my tank lol
03.26.26 Update: I forgot to upload this picture. Poor bird didn’t fly out of the way when I was cruising. Picture was taken on 03.13.26 on my way to Lake Berryessa when I drove ~220miles to run down my tank lol
0 2026/03/26 17:20:03
0 2026/03/26 16:45:58
0 2026/03/26 16:45:55
New oem valve cover gasket and CAS O ring is here. I have a spare valve cover I’m going to cut off the timing gear cover off. Still needs to have the PCV system to be ported and drilled for AN fittings.
New oem valve cover gasket and CAS O ring is here. I have a spare valve cover I’m going to cut off the timing gear cover off. Still needs to have the PCV system to be ported and drilled for AN fittings.
0 2026/03/26 16:31:14
New silicone coupler is here. Just needed to trim it a bit. Verified there’s no contact with the engine bay. Front turbo waterline is officially connected to the turbo and left some slack for engine movement.
New silicone coupler is here. Just needed to trim it a bit. Verified there’s no contact with the engine bay. Front turbo waterline is officially connected to the turbo and left some slack for engine movement.
0 2026/03/26 16:28:10
Rear turbo waterline connected to the coolant reroute housing. Heater core waterlines have been slighted trimmed. As far as I know, the heater core ports aren’t directional. Thinking of bending the heater core metal return pipe slightly so I have greater clearance for the downpipe, and can have some space to make some sort of heat shield.
Rear turbo waterline connected to the coolant reroute housing. Heater core waterlines have been slighted trimmed. As far as I know, the heater core ports aren’t directional. Thinking of bending the heater core metal return pipe slightly so I have greater clearance for the downpipe, and can have some space to make some sort of heat shield.
0 2026/03/26 16:27:35
0 2026/03/26 16:27:32
0 2026/03/26 11:12:24
0 2026/03/26 10:36:07
0 2026/03/26 10:36:05
0 2026/03/26 10:36:02
0 2026/03/26 10:36:00
0 2026/03/26 10:35:57
0 2026/03/26 10:35:55
0 2026/03/26 10:35:52
0 2026/03/26 10:35:50
0 2026/03/26 10:35:47
Advertisement